Desiccant Container for Downward Facing Filament Hole
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The desiccant holder is designed to sit inside the drybox base.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 61
- Makes
- 0
- Views
- 444
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
A desiccant box designed to sit securely inside the base of the drybox, allowing for filament to be fed through a downward-facing port. Keeps desiccant in place while allowing airflow and easy access.
Base-Container_with_Hole.stl
Print face down (grill side on the bed) for best stability and support-free printing.
No supports needed if printed in this orientation.
0.2 - .28mm layer height recommended for good airflow detail and dimensional accuracy.
Infill: 15% is plenty.It should
Base-Cover_with_Hole.stl
Print flat on the bed, with the open side facing up.
Should also be support-free in this orientation.
2–3 perimeters for strength.