Desiccant Container for Downward Facing Filament Hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The desiccant holder is designed to sit inside the drybox base.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 444
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A desiccant box designed to sit securely inside the base of the drybox, allowing for filament to be fed through a downward-facing port. Keeps desiccant in place while allowing airflow and easy access.
Base-Container_with_Hole.stl
Print face down (grill side on the bed) for best stability and support-free printing.
No supports needed if printed in this orientation.
0.2 - .28mm layer height recommended for good airflow detail and dimensional accuracy.
Infill: 15% is plenty.It should
Base-Cover_with_Hole.stl
Print flat on the bed, with the open side facing up.
Should also be support-free in this orientation.
2–3 perimeters for strength.