Fidget Toy tiktak 8x3mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fun little magnet fidget clicker.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 25
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Fun little fidget magnet toy I found. Needed to modify the holes since I didn't have the 8x4 magnets in the original. And I made them press-fit so no glue is required.
All holes should be the same size so you can test the tolerances with a finger part.
---
Resized holes to 8x3 because I didn't have the creator's original sizes. Also decreased the diameter of all of the holes to make the magnets press-fit without glue. (Part can be heated with lighter to remove magnets, but may destroy part.)
Other minor tweaks to the body height to fix a first layer slicer issue.
Adjusted the fingers to remove some extra unwanted play. Changing the height and shape of the fingers allowed me to make a Clicky version and a quieter Clacky version.
---
Printed mine with the following settings:
- 2mm Layer height.
- 4mm Layer width.
- Use adaptive layers ‘On’ (because I forgot).
- 20% infill just for weight/feel.
- 2 Walls.
- 0 Horizontal Expansion
- Wall Outside to Inside.