129 models
This is a remix of the BTT HDMI display mount Voron with all modified parts being compatible with the originals design. So you can Use the remixed mount bracket with the original asymmetrical display frame Use the original mount bracket…
Push your printer and filament to the limit with this fun design. This relatively quick print using a print-in-place gear , tight bridging for the trigger slides, and a compliant mechanism for the trigger pressure makes a fun display…
Thicc skirts for Voron V2 (and probably Trident) Extended skirts to look nicer and make the screen more readable with the awesome Clicky Clack door mod , while not replacing any important bits (like z belt drives for V2). There are…
Latch for the excellent Clicky-Clack Fridge Door mod by @whoppingpochard. This latch has the Voron logo as an inlay so no MMU needed. You can also opt to remove the inlay and just have the logo embossed. If you like this model, please…
Joseph Joestars steel clacker balls from JoJo's Bizarre Adventure part 2. There is both a full model version and a split. I printed at 35% infill.
Parametric Printable Clicky-Clack Seal This is a parametric FreeCad model to generate printable seal strips to replace the Misumi panel clamp ( HSCPF3H-B-2000 ) called for in the original clicky-clack door mod. The panel retainer can be…
with the clicky clacky door the lcd screen is hidden under the door making it hard to see and use the screen. this will pull the screen out so its in plain view again. this is intended for the Waveshare 4.3 lcd screen (ldo kits include…
45-degree mount for BTT PiTFT50 display to also work with the Clicky-Clack door modification intended for Voron 2.4. Display holder was found here: TFT 5" holder for Voron 2.4 - BTT PITFT50 by Alego | Download free STL model |…
Small simple mod for the Clicky-Clacky Fridge Door made by whoppingpochard. Me and STONEDMAKKER went back and forth about making the already awesome handle even better. We both wanted a space for the fingers to grab on to the handle to…
I designed this pocket-sized stress reliever, easy to carry with you everywhere and to use in daily life when you have anxiety or are thoughtful. Immediately after removing the model from the plate, you may need to use some force to…
This is a button/switch in the general shape of a Claymore mine detonator. It uses a guitar pedal stomp switch for a satisfying click. I put a 3.5mm connector on it so it can be used with devices like the Xbox Adaptive Controller or HID…
The Clicky-Clack Fridge Door Mod for Voron 2.4 and Trident printers is one of the best mods you can do to your Voron printer. The mod uses some rubber strip (aka “panel clamps”) that sits between the extrusion and the acrylic panel. To…
Remix of PrintStructor's Cheese Grater Stealth Skirts for Trident 250/300/350 with the Clicky Clack door mod.
Update 04/25: Also added a version with a color change voron-logo on them, because everyone loves some extra voron logo's on their printers. Just make sure to split to objects and use the Z lift settings etc. --- Some simple covers for…
Did not like the opening above the bracket which showed the cables running behind the screen from above. One of the main perks of having the 1.2 version of the HDMI5 screen is the ability to hide the cables better, and this aids with…
! Be careful you can hurt your hand ! Printed in PLA Layer height 0.26 100% infill Wall Line 7 Paracord 60cm / 24in (or old shoelaces) wikipedia.org:…
I made this to open the main valve cover on my water softener when the piston assembly broke. Used some epoxy to repair the piston and it's still working two years later. I just printed it in cheap PLA and it held up for the job. Designed…
I did the awesome “clicky-clack fridge door” mod. But the visibility of my screen was partly blocked by the protruding extrusion of the door. So I remixed this model and it worked out great!
Introduction Because I found the original Clicky Clacky Fridge Door by whopping_Voron to lack sealing against the entire length of the frame of the printer, I've created this mod that splits the handle into two smaller units, as well as…
Compatible with SIBOOR's Voron Trident kit and Clicky-Clack Fridge Door.
Remix of RobReason_2182184's Version for the BTT TFT V2.1 to work with the Clicky Clacky Door Mod. I extended the TFT-Mount by 20/23mm mm to have access to the Full Screen when the Door is closed. There are two Versions, one is 20mm and…
this is a mount for a 300mm voron trident to house a waveshare 7.9in dsi screen. also i have a smaller mesh option insets if you like. if you dont want mesh the standard voron inserts should fit in them as well. the one piece design will…
VORON 2.4 Clicky Clack Door Stealth Skirts Da mir die Optik meiner Stealth Skirts für den VORON 2.4 sehr gut gefällt, habe ich nun eine speziell angepasste Version für Drucker mit dem Clicky Clack Door Mod erstellt. Damit die vorderen…
After trying to convince myself that "not being able to see the entire screen after the clicky-clack mod wasn't too bad" didn't work, i made a remix of Ken226's BTT screen mount. Noticed my door was scraping the top of the case, so i…
UPDATE: 2024-July-19. I posted an updated V3 step and stl. needed to provide a little more clearance as my hinge started sagging and needed to clear the screen cover wanted a mount that extends the screen out 20mm more to give clearance…
This moves the 5" screen 20mm forward to make room for the 20mm extrusion. You need to also print the updated decorative circular parts I have included them.. You will need some support for the side skirts (there is a left and right to…
Picture of the final build will follow This is my version of the TFT50 Screen from BigTreeTech. Ive added a magnetic mount so the screen can be easily removed for maintenance. It is also compatible with the Clicky Clacky Door. It useses…
This mod is for Trident 300 size with BTT HDMI5 1.1 lcd and Clicky-Clack door mod Note: As in the original mod …These parts require that you purchase HDMI and USB Ribbon Cables! Big thanks to @PrintStructor for the original Stealthskirts!…
Choosing the right options Select Pressure based on the squish you want to achive when the door is closed. I use 1mm with 10x3 magnets. BOM 16x M3x5x4 “Voron” heat set insert 16x M3x8 FHCS 8x M3x10 BHCS or SHCS 8x 10x3mm or 8x3mm…
A modified version of @DETMan's BTT HDMI5 Mount for Clicky Clack Door for use with the stealthchanger Door Buffer. Print with normal voron settings.
The BTT HDMI5 V1.2 display moved the HDMI and usb cables to be perpendicular to the PCB, so older versions of this mount won't work. These files should work with the Clicky Clacky door mod, and/or the Door Buffer for Stealthchanger. There…
Overview This mount is for the 4.3" BigtreeTech TFT touch screen with the micro-switch brightness buttons. It has 2.5mm clearance at the top for the clicky-clack door mod and sits flush with the door in the front. The mount is thick and…
This mount allows secure attachment of the BTT HDMI 5 Display v1.2 to Voron 2.4 350mm printers equipped with Thicc Skirts for the Clicky Clack Fridge Door. The design accommodates right-angle HDMI and USB connectors , preventing cable…
Remixed to add support for TridentSkirtLights For more info and the screen parts visit the project this was remixed from: Thick skirts for Voron Clicky Clack Fridge Door ----- This was a request by one of my long term patron, I didn't…
A common problem with this model of the Dometic / Seitz S3 / S4 windows is, that you lose the clips for the spring + steel ball when you don't notice it. I designed this replacement clip that can and should be secured with a cable tie.…
UPDATE 11/14/25: Added alternate version with clearance to door frame, my door sits a little lower due to Monolith Panels. This is tested and just the mount for the BTT 5.0 screen. Will be slowly modfiying files for use on my 350mm 2.4.…
Moved the display to the front when Clicky-Clack Door is installed. Otherwise parts of the display are invisible below the new 2020 profiles of the door. Add an extra 1mm to ensure the door can move freely.
this is an old toy I used to play with as a kid I have already uploaded one version of this toy and I created this one after some feedback let me know that the support for the balls may not be good enough and they may break off so I did…
Voron V0.2 Fridge Door / Colony Clacker Stealth Skirts 2.8" Waveshare screen as the tittle suggests, you are now out of breath reading it… lol but this is the Stealth Skirts option if you want to fit the Waveshare 2.8 inch screen to your…
Modified version of the LDO BTT TFT43 screen mount for Voron V2/Trident to ClickyClack door mod.
A quick remix of the corner clip of Maverick Ng's Magnetic Panels With Magnet Inserts to support the Clicky-Clack door.
STL files are in the right orientation. Printed with supports. Layer Height: 0.2mm Wall count: 6 Solid Top/Bottom Layers: 5. Infill 40% grid. Currently still testing with this design so feedback is welcome! I would like to improve…
Plug-in mesh inserts for thick skirt for clicky clack door
The LDO voron kit comes with a BTT-pi TFT43 touchscreen and a mount for it. With a 2cm-thick clicky-clack door, the screen needs a deeper mount - this is the stock “thick” mount (and the model by rchamp uses the same depth, but adds a…
A 20mm extended version of randomlamer's version of Aero's BigTreeTech PITFT50 HDMI 45-degree Mount (for Voron v2.4). For use with the stealthchanger Door Buffer V2 and the Clicky Clack fridge door mod.
Will Require a Multi-Color printer or 4 Manual Filament changes as you see the side of the skirts so you will definitely see the color change line if you do it the change at layer line. In Orca you will want to go to the object list and…
Remix of “ BTT HDMI5 V1.2 Stealth Skirt Mount” to add 20mm of depth to work with the clicky-clack door system.
I upgraded my Trident corner extrusions from 2020 to 4040s and that rendered the original printed pieces unusable. New parts needed are the hinges and latch hinges, however to make the mounting more accurate and a bit smoother based on my…
Excellent jig by motocoder, I just had issues with being able to accurately see marks to cut strips to proper length.
Now with M6 mounting! These parts are designed for hinges on the left, handle on the right. The handle could be flipped to the left but the hinges would need mirrored. This is sized for two 3030 extrusions with about 0.75mm (.03in)…
This printable file contains only the modified bracket that allows for more space around the USB connector. For the rest of the parts (screen frame), consult the original model.
I needed somewhere to put my Voron Clicky-Clack Door when I took it off to print materials like PLA, what better way than attached to the printer? This is based off the latch model from the Clicky-Clack door as I liked the design of the…
Gives mini-fridge doors a stealthy look and pushes ever so slightly on the panel to reduce vibrations. I used M3x6 screws along with M3 nut traps to lock the corners in place. Pics are from my v0 and Micron.
Thicc skirts for the Micron 180 with a proper Colony Clacker door.
Remix from Ken226's Voron 2.4 Touch Screen Housing for BTT Pi TFT50 V2.0 Extended by 23mm to access the Display when the door is closed.
This is a replacement of a locking clip. The clip is common in water filtering (iron removal) systems, made in USA
Replacement rivets for Ecosoft Pink Softener with Clack WS PI (disc valve) model.
Printing PLA (perhaps PETG/TPU and so on too?) with a well-enclosed printer requires the door to be open. My Clicky-Clack Door on my Voron 2.4 (should fit a Trident aswell) sagged a bit over time and as a result of that keeps swinging…
Adjusted original design from 2020 extrusions to 3030 and modified to fit V-Core 300, larger printers will most likely need more hinges, possibly beefed up deisgn. Adapted to 6mm panels. Notes: Panels don't require complicated cuts, just…
I wanted a door handle for the fridge door mod that gave a bit more squish and found BadMouth's mod of the filament latches. I went ahead and remodeled most of it from the stl's but some of the original is still in there. You'll need two…
this is a toy you swing up and down or back and fourth and the balls will hit together to make a clacking noise I have no idea how it prints if you do print it before I do please come back to comment and let me know how it prints and what…
Created this mod to keep my Micron style all in sync instead of exposing bare blind joints or using other covers that don't follow the Micron aesthetics.
I used PETG for its higher wear and it's increased mass over PLA. Have not testes with PLA but I would bet they would work well.
lid for rain gutter - the old one broke so I made a new model and printed it
A little handheld clicker clacker fidget toy. Perfect for kids or adults alike. Test your skills or annoy whoever your sitting beside. How many clacks in a row? How many wrap around clacks in a row? How many butterfly clacks in a row? How…
Remix for 400mm sized V-Core 4. Beefed Up Hinges. M6 Mounting to Main Frame. Print Instructions Print the Lower and Upper Hinge with 0% Infill and as much walls as needed till the part is 100% solid. Use a filament with good layer…
This is my variant of an old 1960s toy... Clackers! Wikipedia: https://en.wikipedia.org/wiki/Clackers Full instructions / assembly guide. Demonstration You will need: Two golf balls. Shoelaces or paracord 13/64 or similar size drill bit…
Credit goes to Cliffyk, found this model here https://terrylove.com/forums/index.php?threads/clack-ws1-injector-cap-sock
After doing the mod had a little sag on the latch side to threw this on to keep it all aligned nicely
Looking at the giant step beneath the clicky clack door bugged me, so i spent entirely far too much time on this remix. Tolerances are kind of stupidly tight because im bad :D The center section reuses the parts from the original skirt,…
Alternative handle suitable for thicker panels. Handle is mounted on the printer frame instead of the door, allowing to be mounted regardless of the thickness of your panels. Motion is limited to 20 degrees and handle in closed state is…
The Clack-Attack™ Ultimate Question is an open source 40% keyboard you can download and build on your own! Firmware files found on the Github repository here: https://github.com/bishopj7/UltimateQuestion I figured “Ultimate Question”…
I made lot of models with 3D printer during last 4 years. Some of them were exposed on my stall at Maker Faire Prague 2021. Now I would like to offer some of them for other 3D printing guys. There is one small and cheap piece replacing…
Tlačené z TPU.
Tlač z TPU / Print from TPU
I was frustrated by how weak the clicky clacky hinges seemed to be, and how they wouldn't stay parallel to the extrusion when I tightened them down so I decided to re-design them. No supports needed. Recommend 40% infill. You will also…
I made a test linkage. Printed it. The kids loved it and wanted more of them in the world so demanded I post it as a Fidget toy. And here we are. Perhaps not the most creative model, but it should work reasonably well at a wide range of…
In the situation where you are using MGN12 rails for the Y and/or Z rails, the extra width of the carriage means you need to space out the acrylic side panels. A common technique is to use 5mm thick EDP adhesive tape instead of the 1mm…
Inspired by https://www.printables.com/model/629811-a-more-grippy-clicky-clacky-handle, applied the same idea to the ColonyClacker handle
Thicc Skirts with Trident skirt lights Remixed to fit on 300mm Trident with Trident Skirt Lights using the Clicky Clack door. Only Skirts are provided, mounts and diffusers are needed from link below! For more info and the screen parts…
Drain for a bathtub with a click-clack stopper. Featuring a hot-embedded brass thread and O-rings. Supports needed
This is a holder for the clickyclacky door with added space for 3mm foam on the door extrusions. Use 2x M3 hammerhead t-nuts and 2x M3x16 SHCS to attach each holder. The parts are named for hanging the door on the left side of the…
I needed front flat mesh skirts for my 2.4 300mm. I couldn't use the existing version because of the clicky clack door and the BTT HDMI5 I wanted to use. You need to print the parts like it is described here: adjust the modifier in the…
A doorstop with a latch, and with the magic of rubber bands, a little bounce. Also, due tolerance, and the rubber bands, damn this things has a CLACK!
I took over a Doomcube poroject with full size ACM panels, meaning my ginge and handle are 3mm further on each side. I used OnShape to add 3mm reach on the hardware that mount on the door. You can probably keep the middle of the handle if…
I had several small problems with clickfinity based baseplates like my CLICKBase as bins hard to insert/remove, especially if the bins are bigger creep changes the holding power slow to print so i fixed those issues with this connector.…
This mod allows the Micron+ ColonyClacker skirts to be printed in separate parts and friction fit together. Allowing for a clean multicolor part with no filament changes. Print Settings Standard Voron print settings Parts are designed for…
Click Clack Balls: the nostalgic game of the 1970s The bane and delight of an entire generation of children who grew up in the 1970s, the noisy and painful "click-clacks," also known as "clackers" (in their international sense), were, for…
Clicky-Clack Door Modified for use with 6mm Structural Panels. I used these parts for my build with 3mm stainless steel panels and 3mm aluminum spacers on a 2020 frame. Longer hardware is required for anything that bolts to the frame.…
Modified so that the front skirt can be printed in a single piece, same with the back mesh, and then glued together
Printed here in PLA (0.2 (Structural) no support. Install by bending box lid enough to get the pegs to fit into the box lid recesses. its a bit tough to do, but once installed the catch works very well
Remixed skirt, extended by 40mm
This is a cosmetic panel to attach in front of the tophat created using 2020 extrusion on a v2.4 350 with a door buffer/2040 front and clicky clack door for a stealthchanger. It attaches to the front 20mm of the front extrusion and comes…
This is a Voron 2.4 / Trident skirt and bezel that fits the Elecrow / Hoysond 5 Inch 1024×600 IPS touch screen , which - by the way - is a gorgeous screen. Here is a photo of the screen for reference A thicker version to is also provided…
Spare Clack was created for the old MTD Lawn mower to replace the old one. It is serving as indicator when the container is full of grass and should be spilled out .
Have a stealthchanger... good. Have a clicky clack.... good. Also like the stealth skirt design excellent then this is for you. Added a Push button hole to each front skirt as that's How mine is configured, Left side I use for LED's and…
A 2x4 Gridfinity bin for holding an iSclack from iFixit.
Some versions of the BTT 4.3 display had the display cable connector facing outward. This adds a gap for these models.
The toy consists of several separate parts that are printed individually and assembled after printing. When the toy is spun and moved, the balls swing and hit each other, creating a satisfying clacking effect. AssemblyPrint all parts…
