Stronger Clicky Clacky Door
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stronger version of the Clicky Clacky Door Voron Mod.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 20
- Makes
- 0
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
I was frustrated by how weak the clicky clacky hinges seemed to be, and how they wouldn't stay parallel to the extrusion when I tightened them down so I decided to re-design them.
No supports needed. Recommend 40% infill.
You will also need to print the Handle-Hinge_Bottom.stl, Handle-Hinge_Top.stl, Handle.stl, Panel_Clip.stl
You will need 4x M3x10 screws which replace the 4x M3x8 screws that come with the kit. This made the hinge much stronger.
I also created Latch Tight which is shorter to squeeze the door against the body harder which is helpful in making an airtight seal.