1 / 2
Tophat Buffer for SC with Clicky Clack and door buffer — image 1
1 / 2

Tophat Buffer for SC with Clicky Clack and door buffer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Decorative panel to sit in front of the tophat for my v2.4 350 stealthchanger with 2040 front frame and clickyclack door

Rating
0 / 5
Likes
3
Downloads
10
Makes
0
Views
190
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

This is a cosmetic panel to attach in front of the tophat created using 2020 extrusion on a v2.4 350 with a door buffer/2040 front and clicky clack door for a stealthchanger. It attaches to the front 20mm of the front extrusion and comes flush(ish) with the front of a clicky clack door with 3mm foam. suits a tophat that measures 254mm from the top extrusion of the main printer body.

BOM: 

  • 10x voron spec m3 heatset inserts
  • 10x m3x8  (i used SCHS)
  • 6x m3x12
  • 6x rollin or hammer head tnuts

Logo panel takes the heatset inserts, careful not to push too far and mar the front, this is then attached to both sides using the m3x8 screws to make one unit.

the m3x12 are used to secure the completed panel to the frame, this can happen before or after the tophat is in place, it may take a bit of wiggling as it is tight by design.

 

For slicing, Import the step file, split it into the 2 objects, then set the bottom smaller object to 1 wall, 0 bottom layers, 1 top layer, and infill to desired mesh type. For the left and right panel halves, paint manual supports on the big overhang that the logo attaches to. do not have auto supports active or you will have a bad time. See 3mf for how i sliced it

Tags