1 / 7
Prusa Core One Side Storage
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made this storage with space for 3 Print Sheets, 3 Nozzles and tools
- Rating
- 4.925 / 5
- Likes
- 494
- Downloads
- 2,134
- Makes
- 43
- Views
- 9,468
- Reviews
- 40
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Once you print the storage, you can then decide whether you want to use magnets or double-sided tape to hold it in place
You will need the following:
6x magnet 8x2mm
Ore
Double-sided tape
And A black marker to make the letters black
It is printed on a Prusa Core One with 15% infill . and 0.2 mm layers, Print time of about 7 hours and 22min in Prusament PLA