Low poly Pulsefire Saga shell
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low poly styled shell and buttons for the HyperX Pulsefire Saga
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Follow the suggested print settings and assembly instructions from the official HyperX model. I copied them here for your convenience:
Suggested Print Settings
- Filament: PLA
- Walls: 2
- Top and Bottom Layers: 3
- Infill: 5%
- Infill Pattern: Adaptive Cubic
Assembly and Installation
Option A: Use a Phillips screwdriver to remove the screws from the out-of-box component(s) and screw them directly into the 3D printed part.
Option B: If you prefer to leave the hardware attached to the out-of-box part, we've listed the dimensions of the factory hardware used. The 4.8mm diameter head can be substituted for a 3.8mm head.
- Side Buttons and Button Covers: M2.0x3.0 ultra thin flat head screws (3.8mm diameter head)
- Body: M2.0x3.0 ultra thin flat head screws (4.8mm diameter head)
Note: Avoid stainless steel and aluminum screws. Screws need to be attracted to magnets.