Low poly Pulsefire Saga shell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low poly styled shell and buttons for the HyperX Pulsefire Saga
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Follow the suggested print settings and assembly instructions from the official HyperX model. I copied them here for your convenience:
Suggested Print Settings
- Filament: PLA
- Walls: 2
- Top and Bottom Layers: 3
- Infill: 5%
- Infill Pattern: Adaptive Cubic
Assembly and Installation
Option A: Use a Phillips screwdriver to remove the screws from the out-of-box component(s) and screw them directly into the 3D printed part.
Option B: If you prefer to leave the hardware attached to the out-of-box part, we've listed the dimensions of the factory hardware used. The 4.8mm diameter head can be substituted for a 3.8mm head.
- Side Buttons and Button Covers: M2.0x3.0 ultra thin flat head screws (3.8mm diameter head)
- Body: M2.0x3.0 ultra thin flat head screws (4.8mm diameter head)
Note: Avoid stainless steel and aluminum screws. Screws need to be attracted to magnets.