1 / 7
Fit & Anti-Slip Ring (TPU) | Remix of Food Bowl Riser by Eski — image 1
1 / 7

Fit & Anti-Slip Ring (TPU) | Remix of Food Bowl Riser by Eski

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Supports bowls narrower than the original model 135mm diameter bowl size.

Rating
0 / 5
Likes
2
Downloads
10
Makes
0
Views
75
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Share Alike

After printing the Food Bowl Riser model by Eski, I found my bowls were a bit small and just dropped through. Rather than trash a perfectly good riser, I thought this would be a good opportunity to create an adapter for smaller bowls.

The ring is printed in TPU (0.00mm fit tolerance with the original model). The inner diameter is narrowed by 10mm supporting bowls down to 125mm. The ring slopes inward following the original model.

My risers were printed on a QIDI Plus4 using  PLA at 0.24mm Draft quality with supports.

The light melamine bowls fit snuggly, do no slip, and lift out easily.