1 / 4
Stealthburner Adaptation for Ender 5 S1 Linear Rails
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified two parts on Hoon's Ender 5 S1 Linear Rail conversion to be able to front mount a Stealthburner toolhead.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 42
- Makes
- 0
- Views
- 496
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I really wanted a lighter toolhead than what I currently had with the linear rail mod from Hoon. I also wanted to play with a Stealthburner and install an ERCF on my Ender 5 S1. I had to adjust the belt path and add additional bearings to accomplish this.
To do this mod yourself, you will need Voron Heatset Inserts, F623 bearing stacks and shims, and some M3 hardware.
I printed in ABS with HIPS as my support interface. Print with the outside ends facing the plate and enable supports.
Good luck!