P
PrintablesDASToast
Eurofighter Typhoon-kit card
Eurofighter Typhoon-kit card. Future versions may be made, depending on comments.
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
- Downloads
- 96
- Likes
- 13
- Rating
- 0
Search results: hoon
101 models
P
PrintablesDfris
Hoonicorn w/ decals Wall Art
V1 Hoonicorn with some decals. Do not scale down or you won't be able to tell there are words, scale up for better visibility of the words as well. This is as big as my printer will allow me. **Make sure to adjust your thickness. It…
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for one variant
- Downloads
- 88
- Likes
- 18
- Rating
- 5
P
PrintablesDfris
Hoonicorn Wall Art
Silhouette model of Ken Block's hoonicorn. Scale as you please.
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
- Downloads
- 84
- Likes
- 23
- Rating
- 0
P
PrintablesGrant Parker studio
Mini-Z Hoonicorn inspired AWD Rims
Inspired by the iconic Hoonicorn build and American Racing VF503 design, these rims are a stylish upgrade for your Mini-Z. They print cleanly with a standard 0.4mm nozzle—just be sure to enable supports. For best results, I recommend…
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant
- Downloads
- 83
- Likes
- 14
- Rating
- 0
P
PrintablesDfris
Hoonicorn V2 Wall Art
A wall mounted version of the Hoonicorn V2 (after twin turbos). You can scale as you like with this one. Can be made as thick or thin as you like. I typically use 2 or 3 mm depending on location of mounting. The last picture shows V1 and…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
- Downloads
- 66
- Likes
- 14
- Rating
- 0
P
Printablesdeepbluehue
Eurofighter Typhoon
My Cura settings (settings with * are ones I've found to have a large effect on the quality of the print) Hatchbox Light Grey PLA *Temperature: 200 C Build plate temperature: 60 C *Layer height: 0.09 mm Line width: 0.4 mm *Support line…
- Downloads
- 2,257
- Likes
- 119
- Rating
- 4.9
P
PrintablesKitcard Studio
Submarine Typhoon Class - Kit Card
An easy to print and easy to assemble Typhoon class supmarine Kit Card. Use it to decorate your room and to express your engineering hobby!
- Downloads
- 2,035
- Likes
- 462
- Rating
- 3
P
PrintablesNakozen
Eurofighter Typhoon Kit Card
The Eurofighter Typhoon, representing western Europe among the other fighter kits! F16 Fighting Falcon MiG-29 Fulcrum There are 2 versions of the kit, one with a hanging loop, and the other without. There are also the individual part…
- Downloads
- 1,950
- Likes
- 416
- Rating
- 4.93
P
PrintablesUbermeisters
Hyphoon - LARGE Herb Grinder
No really its bigger than you are expecting. Print, assemble, grind, enjoy. Mods: Drum Handle - reduced print time, reduced storage, easier handle spinning (lower torque, not an issue to begin with however) Funnel Drawer - Adds sweeping…
- Downloads
- 1,492
- Likes
- 432
- Rating
- 4.83
P
PrintablesThe Kit Card Guy
Ford Mustang HOONICORN - Ken Block Tribute (1:24 scale)
In memory of Ken Block . Summary This is a model of a 1965 Ford Mustang notchback ( known from “[HOONIGAN] KEN BLOCK'S GYMKHANA SEVEN: WILD IN THE STREETS OF LOS ANGELES ”) in a kit card style. After printing, the model can be assembled…
- Downloads
- 1,134
- Likes
- 141
- Rating
- 4.8
P
PrintablesMM
Eurofighter Typhoon kit card
can be printed together the model needs to be glued together or separately in other colours the Eurofighter Typhoon is very realistic Print in place kit card , Assembly required need to use a support
- Downloads
- 960
- Likes
- 191
- Rating
- 4.33
P
PrintablesSzymon Adamczyk
Eurofighter Typhoon print-in-place micro jet fighter
About the Eurofighter Typhoon - EF2000 The Eurofighter Typhoon is a European multinational twin-engine, supersonic, canard delta wing, multirole fighter. The Typhoon was designed originally as an air-superiority fighter and is…
- Downloads
- 673
- Likes
- 59
- Rating
- 5
P
Printablesjet_maker
Eurofighter Typhoon jet with stand remix
A model of an Eurofighter Typhoon (remix) with dynamic looking stand. Enjoy printing. View my other models too.
- Downloads
- 548
- Likes
- 46
- Rating
- 5
P
PrintablesFoldedSkeleton
Typhoon-Class Submarine (Red October)
I uploaded a Typhoon-class submarine on this site almost two years ago, and though the model took me a long time to create, I was not satisfied with it due to its simplicity. However, I now have more 3D modeling experience, and since the…
- Downloads
- 504
- Likes
- 120
- Rating
- 5
P
PrintablesLordMontag
ROV - TMT Typhoon Mk4
This is a small model ROV that someone at work asked me to print. It is a scale down version of our new work class vehicle - the Typhoon Mk4 (tmtrov.com). For me this was my first proper 3D print project! :) It has a lot of small parts…
- Downloads
- 501
- Likes
- 20
- Rating
- 4
P
PrintablesD3vil.Design
Typhoon shroud K1 Series - D3vil Design
apologies for the delay in posting this … This it a beta Version , kindly do test it and let me know if you have any suggestion ,, ill accomodate them … If you are interested in developing it further please do contact me on Discord…
- Downloads
- 493
- Likes
- 125
- Rating
- 4.86
P
Printablestryhardnumber1
ken block car hoonigan 43
this is the Hoonicorn a 1965 (maybe?) it is from ken blocks car stunt series gymkhana if you have seen it great if you haven't I highly recommend it if you like cars. this was one of his cars that he used probably his favorite.
- Downloads
- 484
- Likes
- 70
- Rating
- 5
P
PrintablesTeo_211
Eurofighter Typhoon Wall Art
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
- Downloads
- 460
- Likes
- 81
- Rating
- 5
P
PrintablesMonster Atlas
Alhoon — Undead Mind Flayer | Free STL | D&D 5e Miniature
Alhoon — Undead Mind Flayer | Free Unsupported STL | D&D 5e Miniature Hey everyone, here's a free Alhoon Miniature from Monsteratlas. We make 3D-printable monsters and characters for D&D and tabletop RPGs, and we wanted to put one out…
- Downloads
- 395
- Likes
- 42
- Rating
- 5
P
PrintablesUbermeisters
The Herb Typhoon - Weed grinder v1.1 UPDATED
There is no plastic-on-plastic contact in the mauling chamber, as a gap provided for the herb to pass through eliminates the possibility of printed parts wearing plastic into your collected herb. Uses (5x each) M3x20 SHCS and nuts…
- Downloads
- 394
- Likes
- 120
- Rating
- 3.67
P
PrintablesJace1969
Pacific Rim Crimson Typhoon
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
- Downloads
- 212
- Likes
- 22
- Rating
- 0
P
PrintablesRaptr117
Typhoon Keychain
Coworker wanted a keychain of a plane or something, so I made this model into a keychain
- Downloads
- 202
- Likes
- 9
- Rating
- 0
P
PrintablesTheNextDecade
Henshin Belt Typhoon from Kamen Rider
Henshin Belt Typhoon from Kamen Rider (1971) Transform into Kamen Rider with your own Henshin Belt Typhoon. This was a bonus with our first ever 3D Model sale. It's old but could definitely help some future Rider cosplayer I'm working on…
- Downloads
- 201
- Likes
- 10
- Rating
- 0
P
PrintablesJohn Swamp
Bluenose Schooner
I only use supports up to the bottom of the sails. There is a thick support on the corner that I snip off after removing the generated supports to reduce the risk of breaking the mainmast. I like the look when painted with opaque acrylic…
- Downloads
- 152
- Likes
- 9
- Rating
- 4
P
PrintablesPaperPlaneLab
Eurofighter Typhoon - Blueprint
Please note the Screenshot: This is a remix made from Printable Blueprints Collection by Basement Creations https://www.printables.com/model/459633-printable-blueprints-collection
- Downloads
- 139
- Likes
- 42
- Rating
- 0
P
PrintablesSteveJohnsen
Prairie Schooner - Fixed F. Axle - Pioneer Covered Wagon (without the bonnet) ~1/15th Scale
UPDATE: I made a version 2 of this design with a pivoting front axle, and a few other changes. It's a lot more fun to play with. :D ----- I needed a covered wagon for an object lesson, and didn't want to decorate a shoebox, as one source…
- Downloads
- 139
- Likes
- 16
- Rating
- 0
P
PrintablesHi_Im_Dave
Hoonigan Handbrake Keychain
Not sure what car this is out of. If you know leave in comments. -RIP-
- Downloads
- 128
- Likes
- 23
- Rating
- 5
P
PrintablesBazzar701
Tiny Hoonicorn - Ken Block Mustang - Mini Cars
Hoonicorn - Ken Block Mustang, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle…
- Downloads
- 121
- Likes
- 11
- Rating
- 0
P
PrintablesDfris
Hoonigan Drip Stencil
Simple Hoonigan stencil with drip effect. Make sure to edit thickness to your liking, again it doesn't need much as a stencil, but you may want more if you mount it in a high traffic area.
- Downloads
- 112
- Likes
- 25
- Rating
- 5
P
Printablespixel2
Hoonigan handbrake grip
This is based on the handbrake grip from Ken Block's Cossie V2. The inlay parts need to be glued in. Two part epoxy works well. The inner diameter is 1".
- Downloads
- 107
- Likes
- 14
- Rating
- 0
P
PrintablesZman
hoon ender 5 s1 spring belt tensioner
my remix of Hoon linear rail adding a spring loaded belt tensioner
- Downloads
- 85
- Likes
- 21
- Rating
- 0
P
PrintablesdrRobert
FX Typhoon & T12 Barrel Clamp and Mount
FX Typhoon & T12 Barrel Clamp and Mount with picatiny holder for bipod. Use ASA for best results.
- Downloads
- 77
- Likes
- 2
- Rating
- 0
P
PrintablesSteveJohnsen
Prairie Schooner - Pivoting F. Axle - Pioneer Covered Wagon, ~1/15th Scale
The Version 1 of this Prairie Schooner covered wagon (without the bonnet) has a fixed front axle, which is fine for displays, but not as fun to play with. This Version 2 has a pivoting front axle attached to the tongue (with a…
- Downloads
- 70
- Likes
- 7
- Rating
- 0
P
PrintablesBazzar701
Tiny Hoonda Passport 2026 - Mini Cars Series
Honda Passport 2026, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
- Downloads
- 70
- Likes
- 12
- Rating
- 0
P
PrintablesMatt Philip
Bluenose Schooner - Sailing Model Toy
Check it out sailing here: I also have a single-masted earlier version that I have not uploaded. Print Instructions Upper Hull must be waterproof: 50mm/s, 1.6-2mm thick walls, 7.5%-10% infill, 0.12-0.16mm layer thickness. Print the rudder…
- Downloads
- 70
- Likes
- 10
- Rating
- 0
P
PrintablesReptilianSnail
Typhoon - A Bullpup Flywheel Blaster
Build guide and documentation Typhoon is designed to be a super short bullpup to minimize the total length of the blaster while still remaining shoulderable. It is designed around high concavity brushed flywheels, specifically the Fuijin…
- Downloads
- 68
- Likes
- 34
- Rating
- 5
P
PrintablesEvgeniy Vainshtein
Ender 5 S1 Front Bed Supports, adapted to work with linear rail kit from Hoon
I've printed all the parts from PETG (230°C/70°C), without support, layer 0.3, cubic infill 30%, 4 walls, 4 top/bottom layers.
- Downloads
- 63
- Likes
- 10
- Rating
- 0
P
PrintablesLjhtom (Javier Hernando)
Hooningan license plate logo for 4 colors
Hooningan license plate logo for 4 colors. Separate stl to generate gcode for each color. layer height 0.2 x 2 layers all colors. back base to reinforce 2 mm. You must group the stl for the same origin, then generate separate processes…
- Downloads
- 62
- Likes
- 24
- Rating
- 4
P
PrintablesBazzar701
Tiny Hoonda City + Motocompo - Mini Cars Series
Honda City + Motocompo, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
- Downloads
- 59
- Likes
- 13
- Rating
- 5
P
PrintablesLjhtom (Javier Hernando)
Hoonigan Garage Container 400 mm
Hoonigan Garage Container Container side garage of the ill-fated hoonigan. Attention large model 400 mm long, scalable for small printers. Model made in parts to be printed lying down, and then glued. Doors do not open, fixed closed model…
- Downloads
- 59
- Likes
- 12
- Rating
- 0
P
PrintablesMR
Eurofighter Typhoon Cookie Cutter
Eurofighter Typhoon Cookie Cutter
- Downloads
- 57
- Likes
- 9
- Rating
- 5
P
PrintablesQuarth4261
C270 Ender 5 Plus Mount Remix From Hoon/Pomi
To fit C270 Webcam to Ender 5 Plus machines
- Downloads
- 54
- Likes
- 5
- Rating
- 0
P
PrintablesRippla
SMK Typhoon Chin Mount
A Chin Mount for your SMK Typhoon Helmet, Been using a week. Printed with 0 supports. Use 3m Double Sided mounting tape (same as what gopro uses can get on amazon). Stick and cut to size of pads, allows 48 hours for it to cure before…
- Downloads
- 52
- Likes
- 2
- Rating
- 0
P
PrintablesDuctoman16
Cranium Whoonu Game Token Piece
A replacement token for the game Whoonu. Included are a 4 and 5 token (which are what I was missing), as well as a Fusion 360 configurable design if you want to make other tokens. Print standing on edge, with supports for best results.
- Downloads
- 48
- Likes
- 1
- Rating
- 0
P
PrintablesGiGo
Japanese Elemental Water Demon Oni Mask - TyphoOni
The second in the Japanese Elemental Oni series - see also InfernOni , OniKaze (Air, Wind) , Little Sakura , Little Coral , Little Bramble Meet the TyphoOni (seriously, you come up with a clever name for him) About 4.5 inches (113mm tall)…
- Downloads
- 41
- Likes
- 8
- Rating
- 0
P
PrintablesLjhtom (Javier Hernando)
Hoonigan Garage Container 680 mm large
Attention large model 400 mm long, scalable for small printers. Model made in parts to be printed lying down, and then glued. Doors do not open, fixed closed model for decoration. This is a new model, based on similar models found. To…
- Downloads
- 40
- Likes
- 7
- Rating
- 0
P
PrintablesDrGnospelius
"Typhoon" Novritsch SSP18 Airsoft Compensator
The Typhoon Compensator is a custom muzzle device designed specifically for the Novritsch SSP18 (and other airsoft pistols with 14mm CCW threads). Since this is a functional part that may take impacts, I recommend the following settings…
- Downloads
- 35
- Likes
- 2
- Rating
- 0
P
Printablessteve
Typhoon blow gun trigger
Trigger for typhoon blow gun this gcode is for ender 3 v2 will upload stl file soon
- Downloads
- 34
- Likes
- 2
- Rating
- 0
P
Printables3DTechInsider
Eurofighter Typhoon 2000 lithophane
This is a lithophane of a Eurofighter Typhoon 2000 that lights up when backlit. A particularly low layer height is not necessary. You can just choose 0.2 or even 0.28 so it doesn't matter.
- Downloads
- 32
- Likes
- 7
- Rating
- 0
P
PrintablesFly Designs
eurofighter typhoon landing gear
remix from nakozen’s eurofighter print settings same as the original model print time : 19 minutes on elegoo neptune 4 (normal printer) happy printing
- Downloads
- 31
- Likes
- 3
- Rating
- 0
P
PrintablesFrontier
C23/E90 gimbal lock system (Typhoon H Plus / H520)
Gimbal lock system (pin and clip) for the C23/E90 camera for Yuneec Typhoon H Plus / H520. Print Settings Printer Brand: Creality Printer: CR-X Rafts: Doesn't Matter Supports: No Resolution: 0.1 Infill: 100% Category: R/C Vehicles
- Downloads
- 30
- Likes
- 2
- Rating
- 0
P
PrintablesDaniel Gladyshev
Less support - Hyphoon
The Max bridge gap is now 41mm instead of 67mm. Check photos for where to use support in the base model designed for 0.2 layer height!!! In addition, I made small modifications so the slicer can print properly the bridges of the screws…
- Downloads
- 26
- Likes
- 3
- Rating
- 0
P
PrintablesDrift Displays LLC
Hoonigan logo
You do not need CFS or AMS for this print or any of my other prints. Add a pause on the correct level and change the filament. Then continue on. Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite White Transmission…
- Downloads
- 25
- Likes
- 2
- Rating
- 0
P
PrintablesLewgit
Hoonigan Shifter TH8s Knob
Ever wanting to try drift up daring heights just like Ken Block. Well then, print the ALL NEW Hoonigan Shifter Knob designed to fit the TH8s Racing Wheel Shifter. Split in two peices to put together when you want to go drifting, racing,…
- Downloads
- 25
- Likes
- 17
- Rating
- 0
P
PrintablesSmeltie
FFBeast Raspberry Pi simracing dash (Elephoont / fanatec CC DD)
Raspberry Pi + Simhub based dash designed for the Elephoont fanatec CS DD FFBeast housing . This may also work with the official fanatec CS DD but I can't guarantee it's functionality. The design includes a safe shutdown button on the…
- Downloads
- 23
- Likes
- 16
- Rating
- 0
P
PrintablesMDesigns7
MINIATURE FIESTA RS HOONIGAN
CARROCERÍA MINIATURA HOONITRUCK PARA FANS DE KEN BLOCK
- Downloads
- 23
- Likes
- 6
- Rating
- 0
P
PrintablesAlwaysTinkering
Kit Card Tree platform for Eurofighter Typhoon by Nakozen
This is a mounting platform and sign bracket for the Eurofighter Typhoon kit card by Nakozen available at https://www.printables.com/prints/143159 These parts are designed to attach to a 3UDC pivot arm so that you can present this model…
- Downloads
- 23
- Likes
- 10
- Rating
- 0
P
PrintablesSolidKnow
Yuneec Typhoon H Propeller Quick Lock A
This is a quick lock (A) for Yuneec Typhoon H Propeller. Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment: Same as installation direction. This product is not from the manufacturer! With my printer settings, this holder…
- Downloads
- 23
- Likes
- 3
- Rating
- 0
P
PrintablesSolidKnow
Yuneec Typhoon H Propeller Quick Lock B
This is a quick lock (B) for Yuneec Typhoon H Propeller. Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment: Same as installation direction. This product is not from the manufacturer! With my printer settings, this holder…
- Downloads
- 20
- Likes
- 3
- Rating
- 0
P
PrintablesNaesstrom
Typhoon H battery protection
I just bought my Yuneec Typhoon H with some spare batteries and needed something to protect the connections when traveling with it. This just slides on and stays there so nothing can give you a short circuit! Print Settings Printer Brand:…
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
Printableslinuxpaul
Yuneec Typhoon LumeCube Ring / Carrier
Lume Cube carrier for Yuneec Typhoon and compatible. Fusion 360 sketch also uploaded. Printed with PETG with 4 walls, 10% infill, 0.4mm nozzle and 0.2 mm layerhight -> weight ~25g: update: more fitting variant forTPU printing added…
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
PrintablesTMShader
Yuneec Typhoon H Propeller Hub A (Intel Aero RTF Compatible)
Propeller Hub (type A) for Yuneec Typhoon H and Intel Aero RTF Drone. Material: PETG (Only tested with PLA, but print with PETG for stability) Nozzle: 0.4mm Layer height: 0.2mm Infill: At least 30% Supports: Yes (Tree supports works best)…
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesTMShader
Yuneec Typhoon H Propeller Hub B (Intel Aero RTF Compatible)
Propeller Hub (type B) for Yuneec Typhoon H and Intel Aero RTF Drone. Material: PETG (Only tested with PLA, but print with PETG for stability) Nozzle: 0.4mm Layer height: 0.2mm Infill: At least 30% Supports: Yes (Tree supports works best)…
- Downloads
- 19
- Likes
- 3
- Rating
- 0
P
PrintablesDrift Displays LLC
Hoonigan Logo
You do not need CFS or AMS for this print or any of my other prints. Add a pause on the correct level and change the filament. Then continue on. Design Concept The Hoonigan sign v2 is inspired by automotive culture, using bold lettering…
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
PrintablesJosh Burridge
HOONIGAN Wall Art
Hoonigan Logo plate. Example in the picture was made on a Bambu Labs P1S using Rapid PETG.
- Downloads
- 16
- Likes
- 8
- Rating
- 0
P
PrintablesSolidKnow
Yuneec Typhoon H Motor Lampshade Puller (Prototyp)
Attention: (Prototype, please test and give feedback) This is a Lampshade Puller for Yuneec Typhoon H LED Cover. Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Like picture This product is not from the manufacturer!…
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesLucav
Back cover for Simple Table Clock by typhoon21
Simple back cover for "Simple Table Clock" by typhoon21 https://www.thingiverse.com/thing:2630872 Category: Decor
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesMaster Gadget
TYPHOON THE NEXT 3DBENCHY
The Typhoon makes a test model have some style. The Typhoon tests Bridging, Overhands, Detail, Speed, and much more.Try it out today and see how fast you can make your X1c, P1P, P1s, A1mini, A1,or any other machine you own. Leave in the…
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesLucav
Back cover for Simple Table Clock by typhoon21
Simple back cover for "Simple Table Clock" by typhoon21 https://www.thingiverse.com/thing:2630872 Category: Decor
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesJestemKaspi
Hawker Typhoon landing gear wheel
Model based on photos and hobby magazine technical drawings
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
Printablesrobo
Chooner
Chooner, a place to put your chopsticks before, during, and after a meal. Before the meal, Chooner keeps your chopsticks from touching the table. During the meal, Chooner keeps any food stuffs from soiling the table. After the meal,…
- Downloads
- 11
- Likes
- 3
- Rating
- 0
P
PrintablesBlake Aldridge
typhoon 2s/3s battery adapter
what you will need to make the adapter is some small nuts and bolts (and the buggy) that are in the in the pictures.
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesGoh Cheng Hoong
- Downloads
- 6
- Likes
- 3
- Rating
- 0
P
PrintablesLuk3
The Typhoon (Battle Tops by Luke Gonet)
Design Statement: By culminating the numerous skills from the class, design a battle top to compete in a tournament with your peers. Constraints: The Beyblade must fit within a 7x7x7cm constraint box The Beyblade must be compatible with…
- Downloads
- 2
- Likes
- 1
- Rating
- 0
P
Printables
Alhoon — Undead Mind Flayer | Free STL | D&D 5e Miniature
Alhoon — Undead Mind Flayer | Free Unsupported STL | D&D 5e Miniature Hey everyone, here's a free Alhoon Miniature from Monsteratlas. We make 3D-printable monsters and characters for D&D and tabletop RPGs, and we wanted to put one out…
P
Printables
Ford Mustang HOONICORN - Ken Block Tribute (1:24 scale)
In memory of Ken Block . Summary This is a model of a 1965 Ford Mustang notchback ( known from “[HOONIGAN] KEN BLOCK'S GYMKHANA SEVEN: WILD IN THE STREETS OF LOS ANGELES ”) in a kit card style. After printing, the model can be assembled…
P
Printables
Eurofighter Typhoon Wall Art
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
P
Printables
Prairie Schooner - Fixed F. Axle - Pioneer Covered Wagon (without the bonnet) ~1/15th Scale
UPDATE: I made a version 2 of this design with a pivoting front axle, and a few other changes. It's a lot more fun to play with. :D ----- I needed a covered wagon for an object lesson, and didn't want to decorate a shoebox, as one source…
P
Printables
Prairie Schooner - Pivoting F. Axle - Pioneer Covered Wagon, ~1/15th Scale
The Version 1 of this Prairie Schooner covered wagon (without the bonnet) has a fixed front axle, which is fine for displays, but not as fun to play with. This Version 2 has a pivoting front axle attached to the tongue (with a…
P
Printables
Ford Mustang HOONICORN - COMMERCIAL LICENSE (1:24 scale)
In memory of Ken Block . Summary This is a model of a 1965 Ford Mustang notchback ( known from “[HOONIGAN] KEN BLOCK'S GYMKHANA SEVEN: WILD IN THE STREETS OF LOS ANGELES ”) in a kit card style. After printing, the model can be assembled…
P
Printables
Typhoon - A Bullpup Flywheel Blaster
Build guide and documentation Typhoon is designed to be a super short bullpup to minimize the total length of the blaster while still remaining shoulderable. It is designed around high concavity brushed flywheels, specifically the Fuijin…
P
Printables
Typhoon-Class Submarine (Red October)
I uploaded a Typhoon-class submarine on this site almost two years ago, and though the model took me a long time to create, I was not satisfied with it due to its simplicity. However, I now have more 3D modeling experience, and since the…
P
Printables
Bluenose Schooner - Sailing Model Toy
Check it out sailing here: I also have a single-masted earlier version that I have not uploaded. Print Instructions Upper Hull must be waterproof: 50mm/s, 1.6-2mm thick walls, 7.5%-10% infill, 0.12-0.16mm layer thickness. Print the rudder…
P
Printables
Bluenose Schooner
I only use supports up to the bottom of the sails. There is a thick support on the corner that I snip off after removing the generated supports to reduce the risk of breaking the mainmast. I like the look when painted with opaque acrylic…
P
Printables
Alhoon — Undead Mind Flayer | Free STL | D&D 5e Miniature
Alhoon — Undead Mind Flayer | Free Unsupported STL | D&D 5e Miniature Hey everyone, here's a free Alhoon Miniature from Monsteratlas. We make 3D-printable monsters and characters for D&D and tabletop RPGs, and we wanted to put one out…
P
PrintablesThe Kit Card Guy
Ford Mustang HOONICORN - COMMERCIAL LICENSE (1:24 scale)
In memory of Ken Block . Summary This is a model of a 1965 Ford Mustang notchback ( known from “[HOONIGAN] KEN BLOCK'S GYMKHANA SEVEN: WILD IN THE STREETS OF LOS ANGELES ”) in a kit card style. After printing, the model can be assembled…
- Likes
- 21
- Rating
- 0
P
Printables
Hoonicorn V1 Outline Wall Art Ford Mustang
Hoonicorn V1 silhouette outline. Scalable and good decor
P
Printables
Hoonicorn V2 Wall Art Ford Mustang Ken Block
Hoonicorn V2 Silhouette Wall Art, can be hung or stand alone
P
Printables
1/700 Modernized Typhoon Class Submarine
This model based on Soviet/Russian Typhoon class submarine. Four ballistic missile launchers are added to the original model. Further, new ducted propulsion system is added.
P
Printables
Rigid shop vac adapter for "Exhaust for router table by cahoon"
This is an adapter for Exhaust for router table by cahoon to fit the 58mm opening of my Rigid shop vac. Printed with Solutech PLA at 15% infill. I sealed the connection with silicone for a good air tight fit. Category: Machine Tools