Typhoon shroud K1 Series - D3vil Design
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made to acommodate the Super powerful 5015 Typhoon Blowers from D3vil Design
- Rating
- 4.857 / 5
- Likes
- 125
- Downloads
- 496
- Makes
- 10
- Views
- 3,555
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
apologies for the delay in posting this …
This it a beta Version , kindly do test it and let me know if you have any suggestion ,, ill accomodate them … If you are interested in developing it further please do contact me on Discord @omranello
the blower can be found at:
PRINT SETTING :
i prefere ASA or ABS use what you think best for your setup .. i usually use 3-3-3 or 4-4-4 depending on the part am printing .. use as you see fit ..
i made the face flat to be able to print it and get the pattern to make it look good
- the red color .. is only one color change ... at specific layer where the Logo starts .. and back to Black.
NOTE:
1- The blower "Screw ears" should be cut-off to fit the shroud and the front cover should be removed ( like the voron SB shroud ) as you can see the blower with the screw holes cant be fitted within the shroud.. Please take care when cutting the holes as the Typhoon have a solid piece and not hollow .. so it wont be like other blowers.
2- Adding the 5015 Typhoon at the top it will be very close to the Toolhead cabel connector … The cabels should be rearranged as in this image below :
BEFORE 
AFTER: 
this will allhow to free more space behind the blower… Make sure you dont damage the wires .
The design started with 2 → 4 Duct .. it was restrecting the flow from the Typhoon .. so i changed it to 2→6 ducts allowed me to get more air speed / flow .. but i feel there is still more could be done to refine this.
Here are some of the Renders of this Model designed with Kristof .
