Clamping Remote Control Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds two remote controls, and clamps to thin desks or tables.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 89
- Makes
- 0
- Views
- 333
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial
This holder can clamp onto a thin table or desk and hold two remote controls. The inner dimensions of each remote control compartment is about 47mm by 25mm, so it should hold remotes of that size, or smaller. The holder can fit on desks or tables that are 25mm or thinner. I made it to fit onto an IKEA Bollsidan table, and it fits well when the screw is tightened. The screw is made to have a tight fit. The first time you screw it in you may be unable to screw it in fully by hand, but once you screw it in all the way it should be hand tightenable. If you have any problems you can try scaling the screw very slightly.