1 / 3
Shark Vacuume Cleaner Atachment Single Wall Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple way to mount a single attachment to the wall with a Screw
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution
Printing Instructions
Filiment
| Material Advised | PETG |
Material Propaties Required
| Constancy | Hard |
| Durablity | Not brittle but doesnt need to be up to much |
| Sun Bleaching Protection | As a practical long term use item if in sunlight PLA might not be advisable |
Slicing
| Print Direction | Vertical |
| Infill | 15% |
| Supports | Not Required |
Instilation Instructions
Drill Hole
- present the Mount to the wall
- position to desired location
- use a pencill inserted through the screw hole to mark hole
- drill hole
Install Rawlplug
- push thhe Rawlplug in untill flush
insert screw
- feed screw through the holle in the front and in to the Rawlplug
- tighten by hand to preven cracking
