Magnifying Lamp Table Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.02 – €1.25 net (excluding VAT)
For file: Halter_Lampe_huelse_0.2mm_PETG_MK3SMMU2S_1h17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.14 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.28 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Magnifying lamp table holder for table with 50x20mm circumferential rib on bottom side. Regular clamps fail here.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Motivation
As I have a working desk with a 50x20mm circumferential rib on bottom side, the regular clamp table holder for my magnifying lamp cannot be used.
As a solution, I designed a stable version of a magnifying lamp table holder.
Print parts with PETG (no supports required)
Orientation:
Top part + Bottom part → position on side
Socket → position upside down (visible face on heatbed)
Assembly
[1] Cut M5 threads into the bottom holder part
[2] Position top part, then place bottom part and clamp with two M5x30 hex-head-screws
[3] Insert the socket
[4] Insert the lamp into the socket