Adler 87 Bobbin, dimension 24 x 8.5mm and 6mm hole
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adler 87 Bobbin, dimension 24 x 8.5mm and 6mm hole
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Replacement bobbin for my Adler 87 Sewing machine, dimension 24 x 8.5mm and 6mm hole
Such a bobbin is hard to print in one piece, possible with a Resin-Printer.
The main focus for this model was to get it as accurate as possible, and easy to print with an FDM printer. Both half-pipes are equipped with a 1mm hole to insert the end of the thread before winding the bobbin.
If the holes are not printed fine, simply use a Dremel or small drill
Printed with PETG, 100% infill, on my Prusa MK3s, 0,15mm layer and a 0,4mm nozzle
I am sure you get much better results with a 0,25mm nozzle and smaller layer.
Will give it a try when I own such type.
Additionally I designed a small tool. Makes it easier to assemble the two halfpipes into the bobbin-side.
Depending your printer it is possible required to rescale in your slicer to get it in perfect dimension