Mega Barrel and Rails for Pick-Rocket 2 (X-Shot Skins Menace Remix)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mega Barrel, including sides for mounting rails and priming fix for the Pick-Rocket 2 (X-Shot Skins Menace Remix)
- Rating
- 5 / 5
- Likes
- 47
- Downloads
- 106
- Makes
- 2
- Views
- 787
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mega Barrel for the Pick-Rocket 2 X-Shot Skins Menace Remix
After seeing the model and remembering that the menace could launch Megadarts (tnx @Corvus_1914958), I knew there was more potential being left on the table. Someone just had to do it.
The Mega barrel is shortened, so you are still able to reach inside to fire full or half-length darts. Performance is good enough for short range and to make the darts whistle. Got an average of 45 FPS depending on dart fit. Full length darts gave me 70 fps.
Just note that the Air restrictor needs to be removed from the original barrel/plungertube, put a bit of Teflon tape between the frontplate and the plungertube to seal any air leaks. It is advised to pad the rear of the plungertube with some lightweight foam to prevent cracking the plunger from dry firing.
And as bonus I made screw mount holes to the side panels so you can use the rail options of the original Micro reshell. For some lucky reason they line up great with the rails of the original Micro blaster.
I'm not a great 3d modeler yet, but I can slice stuff up to create something silly, for the fun of it.