70cm Moxon Based on DL2MAN's 2M Moxon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A scaled down version of the 2M DL2MAN Moxon where the Mid-section, feed point and T-section have been scaled to fit.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 91
- Makes
- 0
- Views
- 629
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I absolutely adore my 2M Moxon that DL2MAN designed and I really wanted to try the 70cm design but my printer would not print his 70cm model as the build plate was just a tad too small. Therefore I decided to built a scaled down version. This meant combining the mid-section, feed point and T-section into one monolithic unit.
I also created a tube jig to correctly size the plastic tube arms. To make the 70cm model you will need to:
Print:
1 x 70 cm moxon body
1 x moxon arm jig - this is the jig for cutting the arms to the correct length.
2 x 70 cm moxon insulators.
Buy:
1 x 1m PVC Tube 10mm OD/1mm wall eg https://www.amazon.de/dp/B00ZXPOQHU?psc=1&ref=ppx_yo2ov_dt_b_product_details
22AWG/0,5mm^2 Wire
BNC socket eg https://www.amazon.de/ASHATA-Schottstecker-weiblich-Chassis-Monitor-Standard/dp/B07KVTLMNN/