Counting matching models…
This is the housing for DL2MAN uSDX Sandwich , so users that already have an existing Sandwich can print an easy housing. It requires to remove the electrolytic capacitor below OLED, replace it with a small tantalum capacitor and solder…
Printed with PET-G filament.
Printed with PET-G filament.
The Feedpoint Part is modified to be not so pointy (because pointy is scary ;-). Also I reduced the drill size of the inner holes, so you can use a cable tie (or knot) for strain relief. The optional cap can be used to close/protect the…
I absolutely adore my 2M Moxon that DL2MAN designed and I really wanted to try the 70cm design but my printer would not print his 70cm model as the build plate was just a tad too small. Therefore I decided to built a scaled down version.…
I modified the battery-slider from DL2MAN with an integrated space for a smal USB-C charging board for 3S batteries.
Allows mounting of 2 meter moxon antenna by DL2MAN direct to a painters pole or broom handle.
I wanted to join the 2m and 70cm segments together so that I could hold the antenna like a dual band handheld antenna. I cut the chamfer off of the pole adapter in my slicer and glued it onto another pole adapter so to make it long enough…
Decided to place the spreaders and tube housing on one bed. Made the tube holders longer so you have less strain on your prints. PETG will work best for this. Hope you have fun and original design goes to DL2MAN.
Allows mounting of 2 meter moxon antenna by DL2MAN direct to a painters pole or broom handle.
