SMA bushing adapter for DL2MAN's MOXON antenna
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SMA connector bushing to add to the 2m Moxon feedpoint to allow for a SMA jumper to connect the two to one radio.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 115
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I wanted to join the 2m and 70cm segments together so that I could hold the antenna like a dual band handheld antenna. I cut the chamfer off of the pole adapter in my slicer and glued it onto another pole adapter so to make it long enough to connect the two antenna segments to the same center point. Then I soldered another SMA adapter to the BNC in the tip of the 2m pole. That's where this bushing I made comes in. It secures the new SMA adapter and now just make a SMA jumper wire between the two. I haven't tried it yet, but the hardware is done.