SKADIS + Pimoroni Raspberry Pi 4 Heatsink case mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tight fitting mount/clip for a RPi4 in the titular enclosure that leaves all ports, pins and status LEDS exposed.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
This design fits the well-known IKEA SKADIS and this specific case: https://shop.pimoroni.com/products/aluminium-heatsink-case-for-raspberry-pi-4 - there are many more like it which look very much the same, and will probably fit.
In case your variant doesn't fit, I have included a FreeCAD (1.0) source file so you can tweak as needed
Assembly requires gluing, and you might have tolerance issues, because this is a pretty tight fit. You should be able to slide the Pi in from the top with a bit of wiggling.
Printed mine using PETG, and designed the thing with this material in mind. I recommend a 25% infill with PETG.
Prints on a single plate without supports, I optimized for using very little material.
Please let me know if it breaks: I'd like to know how, so I can modify and strengthen the design.
This clip wasn't designed for popping the Pi in and out frequently, but if you need to remove the whole thing from the board, the hooks act as little feet for the Pi on a table. All ports are accessible - at least on my Pi and case variant.