Army Signal Corps Panda - 10th Mountain Division
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the 10 MTN G6 logo from 2023-2025 and is a gem across the entire Signal Corps community.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
Behold the Commo Panda. 10th Mountain Division G6's logo. Easy print, no special settings, just do a G-code modifier to pause at the layer heights and change colors if you want. There are three (3) different layers.
Print Instructions: printed on Ender 3 v3-SE (Cura slicer)
+ Standard printer settings will work with this file.
Nozzle: 0.4mm
Layer Height: I used 0.2mm (others will work)
Infill: 15% (personal preference)
Temperature/Material: dependent on filament recommendations
Supports: No
Build Plate Adhesion: Skirt
Model Orientation: Print with flat part on the build plate
Post-Processing: None, unless you decide to print it in one color and paint it
+ I used PLA for this print, however, if you're concerned about durability or other properties, this can easily be printed in PETG or ABS.