Army Signal Corps Panda - 10th Mountain Division
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the 10 MTN G6 logo from 2023-2025 and is a gem across the entire Signal Corps community.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
Behold the Commo Panda. 10th Mountain Division G6's logo. Easy print, no special settings, just do a G-code modifier to pause at the layer heights and change colors if you want. There are three (3) different layers.
Print Instructions: printed on Ender 3 v3-SE (Cura slicer)
+ Standard printer settings will work with this file.
Nozzle: 0.4mm
Layer Height: I used 0.2mm (others will work)
Infill: 15% (personal preference)
Temperature/Material: dependent on filament recommendations
Supports: No
Build Plate Adhesion: Skirt
Model Orientation: Print with flat part on the build plate
Post-Processing: None, unless you decide to print it in one color and paint it
+ I used PLA for this print, however, if you're concerned about durability or other properties, this can easily be printed in PETG or ABS.