Liczymy pasujące modele…
Hier kommt ein ganz besonderes Tool für kleine und große Mathematik-Fans: Unsere Fidget Spinner mit 5,5 cm Durchmesser vereinen Spaß und Lernen auf coole Art und Weise! ✨ Die Spinner decken alle vier Grundrechenarten ab – Addition,…
Join us and get the Welcome pack (30+ models) right now: https://patreon.com/dakkadakkastore https://myminifactory.com/users/DakkaDakkaStore?show=tribe There is a 30% discount on STL files for all Patrons and Tribers! More free models…
2 versions of files are included: pre-supported and unsupported. All parts have been prepared and tested for 3D printing. We recommend to print in resin. Details The 2nd Death Division commander with 4 interchangeable right hands…
Ive tried to recreate the sniper turret from the video game "The Division 2" by Massive Entertainment. Goal was to stay as close to the ingame model as possible and also make it easy to print. Leave a comment if you like or have problems…
Remix of ( https://www.printables.com/model/440401-under-desk-drawer-updated )
I made this in TinkerCAD (big mistake) The angles were very hard to achieve using the software XD Should print fine, supports around the eyes might be difficult to remove but tree supports should fix that! (This is where I really wish I…
Just for fun and the cosplayers out there... The grip is splitted into 2 halfs and then glued together. I just had brown PLA, used for a test print and will be painted later on. You can add led's to the inside for illumination. Will do…
Umbrella Corporation - Security Division, Raccoon City, License Plate Frame, Resident Evil Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
Emitting Device from "The Divison 2" game. Printed in PLA / Just had blue PETG for the illumination. 16 magnets of 10mm x 3mm are used to hold everything together. LED's I used some cabinet lights which I teared down.
Modular drawer divider for IKEA desk MICKE There are two special boxes. One for the normal Xbox controller and one for the Elite Xbox controller incl. charging station. Currently I don't have anything printed yet except for the grids, so…
Here is my third version of a costume prop for Tom Clancy's The Division video game. It's some kind of shoulder beacon / gizmo that all the characters wear. I'm not really sure what it does in the game, but if you're making a costume for…
Français . Remix du beau travail de Double Alfa. J'ai recoupé avec Slic 3R, pour pouvoir imprimer sur multimatériaux en Double Extrusion. Imprimé à 50% English . Remix of the beautiful work of Double Alfa. I cut with Slic 3R, to be…
Remix of the original cups by Ari with more subdivisions for shallow divider cups. Helpful for low-quantity or really small parts. I'll upload more subdivision variations as I need them
A desktop nameplate, subtext “Chief Of Unicorn Division”, with 1250 first names included. Print instructions You can print the nameplate without any support, in the “face up” direction as in the STL. This way the front will look smooth…
We designed a custom measurement boxes according to the rulebooks with 7.5mm thick walls for increased durability. Actual internal dimensions of the 3D model (tolerance included) 226mm x 151mm x 46mm Rulebook internal dimensions 225mm x…
This is an easy to print box for storing small things in. There is a place for labels at the front.
Disclaimer: These and other models are available to all "my club" members starting at $5 per month, as well as for one-time purchase. Your support helps sustain the development efforts and the acquisition of modules. Thank you very much!…
. Print instructions Category: Household
Français : Travail inspiré par Johnny Vegas qui a réalisé la chose "The Division" https://www.thingiverse.com/thing:1287651 , et du travail que j'avais déjà effectué https://www.thingiverse.com/thing:3387467 . Toutes les parties ont été…
The g-code was sliced for 3 color changes (Black, Olive Green , then Red). It was scaled to 150% in X & Y only. Prusaslicer’s default .2mm quality setting with 15% infill. STL file included.
A simple collapsible measurement box sized to USPSA competition dimensions. Inner dimensions of the box as-printed should be 8 15/16" x 6" x 1 5/8", with tolerances (+1/16", -0"). Note that these pieces are sized to print 41.4 mm high and…
Insipred by The Division game Dimensions: 13mm x12mm x2.6mm Stand: https://www.prusaprinters.org/cs/prints/154505-sign-stand Print instructions Use filament change feature for last 3 layers My Print settings: Ironing feature, 3 perimeters…
The g-code was sliced for 4 color changes (Black, Yellow, Black, then Green). Prusaslicer’s default .2mm quality setting with 15% infill. STL & 3mf file included.
The g-code was sliced for 5 color changes (White, Black, Red, Yellow, then White again). Prusaslicer’s default .2mm quality setting with 15% infill. STL file included and 3mf included.
Description This project contain a set of 10 baskets and 1 universal cover. They can be used for watch parts cleaning machine or with any ultrasonic cleaning machine when small parts need to be cleaned. Characteristics Each basket has a…
Engage and educate young learners with this interactive 3D print model designed for mastering multiplication and division skills. The model comprises nine 12-sided dice, each featuring the product of a multiplication table. Children can…
Francais : . Remix du beau travail de Johnny Vegas. J'ai recoupé avec Slic 3R, pour pouvoir imprimer sur multimatériaux en Dual Extrusion. English . Remix of the beautiful work of Johnny Vegas. I cut with Slic 3R, to be able to print on…
Summary This is a tension member jig for 2025-2026 Science Olympiad Boomilever event. The distance between the bolt mounting hole and the bottom of the surface is 150 mm, comply with the construction parameters. It could be used for both…
I like the look of emnullfünf's take on the iconic pulsar data , but I wanted it to look more "layered" like the original image. To do this, I used the rotate_extrude function in OpenSCAD, and I think it looks pretty nice! If you print…
The g-code was sliced for 2 color changes (Red, then Yellow). Model was also scaled down to 75%. Prusaslicer’s default .2mm quality setting with 15% infill. STL file included and 3mf included.
The g-code was sliced for 3 color changes (Green, White, then Blue). Prusaslicer’s default .2mm quality setting with 15% infill. STL file included and 3mf included.
Storage trays for game counters. Designed to fit 2 side by side in a normal wargame box in the same space normally used for one commercially available counter tray (GMT, Aegis, etc.). Lid tucks in under the box when in use. Counters shown…
NOTE: SEE v3 HERE: http://www.thingiverse.com/thing:1411233 Here is my second version of a costume prop for Tom Clancy's The Division video game. It's some kind of shoulder beacon / gizmo that all the characters wear. I'm not really sure…
gridfinity divider bin 3x1x6U or 3x1x3U 6 divisions perfect for electronical component for exemple
The Division SHD LOGO Cherry MX keycap uploaded a new repaired model that fits the key better added 2 part file Category: Video Games
Second Armored Division Patch 2AD - Hell On Wheels Designed for multi-material or single-material Print instructions Scale up about 300% for detail.
The g-code was sliced for 3 color changes (Blue, Red, then White). Prusaslicer’s default .2mm quality setting with 15% infill. STL file included and 3mf included.
Francais : Une plaque de porte pour les joueurs de TC's The Division 2. Fait pour être imprimé avec multimatériel. Le fichier STL est modifiable dans Slic 3r (il a été fait avec). Il se compose de 60 éléments dont vous pourrez changer les…
Sometimes you need to be able to quickly divide your work into equal or proportionate parts, that's why I made these models. This is, for example, useful in pottery when you want to make patterns or specific forms harmoniously spaced like…
Inspired by The Division game Dimensions: 15mmx14mmx2.6mm Stand: https://www.prusaprinters.org/cs/prints/154505-sign-stand Print instructions Use filament change feature for last 3 layers My Print settings: Ironing feature, 3 perimeters…
Simple with a twist… yep
Ideal for measuring board game-related things. If you want to multi-material print, you will need to set the materials manually in your before printing. Attached SCAD has colors set up in the script, so you might be able to automate it…
Just a basic keychain design based on a bigger project we have been working on. Works perfectly with 25mm keychain rings. Print instructions 0.15mm layer 218 nozzle 60 bed 20%infill
Amiga 1200 trapdoor for Indivision AGA MK3 VGA port PCB. Remix from https://www.thingiverse.com/thing:4609489
This is a fun imagination inspiring ID card for G.E.L, the Galactic Exploration League! @bugman_140 created this fun toy for the 2022 LM Show Christmas Community Print Drive! We recommend printing this with a color layer change to make…
Panzer III ausf L code 235 of the 2nd SS Panzer Division Das Reich In March of 1942, a study was conducted to assess whether the turret of the PzKpfw IV could be fitted onto the superstructure of the Pz Kpfw III. After analysis, it was…
The Anel insulated hive stock entrance is large for a new hive install or split. This reducer can be used Winter or Summer and flipped to close off entrance on a single side or transport. The names Left and Right allow for the entrance to…
This is a rear trapdoor and a holder frame for the HDMI output of the Individual Computers Indivision AGA MK3 on an Amiga 1200. The design is specially made for A1200.net replica cases, and may not work for classic Amiga 1200 cases. It…
Corporal of the 2nd Division, Balakhovich Detachment, 1919 Category: People
Division 2 Demolitionist Class Cherry MX keycap uploaded a second model which is slightly different and more accurate. uploaded a new repaired model that fits the key better new version 2nd june 2019 divdemocherrymx2.0 Category: Video Games
Background I have a very old metalworking lathe (Zyto) made in the 1930s/1940s, and it didn't come with graduated dials on any axis. I made some a while ago but they weren't too great, so now I plan to make some decent ones. Unfortunately…
Background I have a very old metalworking lathe (Zyto) made in the 1930s/1940s, and it didn't have graduated dials on any axis. I made some a while ago but they weren't too great, so now I plan to make some decent ones. Unfortunately I…
NOTE: SEE v3 HERE: http://www.thingiverse.com/thing:1411233 Here is a costume prop for Tom Clancy's The Division video game. It's some kind of shoulder beacon / gizmo that all the characters wear. I'm not really sure what it does in the…
Just wanted to have some division in the waste box so that I can separate the materials
The Lancer Division Modular Rifle (L.D.M.R) is a next-generation compact rifle platform designed for elite strike units, reconnaissance teams, and high-speed tactical operations. Its silhouette reflects a balance between modern military…
Remix of @Steve_9363's Bin Dividers for 10 division, 5 division and a 4 division variants; for Akro-Mils 10144 or 10164
Task: Divide the cube into pieces of equal volume This task could be integrated into any level of education from primary school. We proposed the task as a contest and supported the student in their explorations. The results varied from…
This is still a Work in Progress. Joy Division - Unknown Pleasures multi-colour print. The angled photograph is printed 95mm x 95mm x 2mm (beermat size) but the lines are too narrow for my printer to be able to get any white in there. I…
Compartment box with 11 divisions for regular size western blot nitrocellulose or PVDF membranes (8.3 cm x 13 cm) and compatible with 12 well SDS PAGE. This box was designed to facilitate incubation with different antibody samples against…
Print in PLA / PETG without supports. Make sure you paint the seem on the corner edge. My recommended setting: 0.2 mm layer height, 4-6 bottom solid layers, 2 perimeters
Brio division track Operator, beware division by zero. Two male to male connectors of different length. More tracks piece models available here in my toys collection: https://www.printables.com/@m_collectable/collections/2703828 See the…
la necesidad de organizar las gabetas de los tornillos, hizo que sieñara unos compartimentos para la organizacíon mas efectiva
Division 2 Sharpshooter class Cherry MX Keycap uploaded a new repaired model that fits the key better Category: Video Games
This is my take on the mn rebel alliance. There are lots of similar models and logos out there. I wanted bigger laser eyes and the North Star so I used tinkercad and used some .svg files created in vcs. I attached the .stl for those of us…
Cookie Cutter based on Phoenix SHD insignia from The Division game series. This cutter will have contact with food, and while currently there's no proof that PLA or PET-G has any negative impact on food, especially the one that will be…
Color The Division game logo. Category: Games
This is a visualization of the first discovered radio pulsar, PSR B1919+21 . It was discovered by Jocelyn Bell Burnell in 1967. It's also the cover of Joy Division's debut album Unknown Pleasures . The visualization is a stacked line…
Task: Divide the cube into pieces of equal volume This task could be integrated into any level of education from primary school. We proposed the task as a contest and supported the student in their explorations. The results varied from…
This is a remix from the original with no divisions on the inside. Also, this is bigger compared to others. Print Settings Printer Brand: QIDI Printer: I-Mates **Supports:** Yes Resolution: 0.2 **Infill:** 15 Filament: SunLu Silk PLA…
Caja organizadora con division Medidas: 20cm x 20cm x 12cm
This model is a 3D printable representation of the mouse brain featuring surface grooves that delineate major cortical regions. It was generated using the Allen Institute's Mouse Common Coordinate Framework (CCF) atlas (see:…
Badge Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 25% Filament: Plexiwire ABS Orange Black White Notes: Badge Category: Games
2nd Infantry Division Patch
This box was designed to fill a gap in my drawer that already had a cutlery drawer liner. Because the drawer has a rounded inner edge I angled one side wall of the box a bit. The box is subdivided into one large and one small compartment.…
The division 2 Survivalist Class CherryMX Keycap uploaded a new repaired model that fits the key better Category: Video Games
This addon for the IKEA ORDNING Cutlery Stand is designed to help organize your silverware, There are two sections of different heights for smaller cutlery, like coffee spoons (see photo for reference), but please note the following:…
29th Infantry Division Insignia. SVGs included to recreate or modify 10mm hight 20% gyroid recommended infill. Color changes: NOTE: Highly recommend slicing and then seeing in your slicer where the level changes are. This is what works…
Caja organizadora con division y perforaciones Medidas: 20cm x 20cm x 12cm
Task: Divide the cube into pieces of equal volume This task could be integrated into any level of education from primary school. We proposed the task as a contest and supported the student in their explorations. The results varied from…
Map of the Egyptian Exodus - The Division of the Land in the Days of Joshua Ben Nun. Map of the Egyptian Exodus - The Division of the Land in the Days of Joshua Ben Nun. 3D image of the map of the division of the land into the 12 tribes.…
I made this to display to hold https://www.printables.com/model/509873-us-armys-3rd-infantry-division-patch
PLA: 0.16mm 100 mm/s 10% infill
Both pretty much the same, one with stand. Please look for the differences between them.
This is a replica of Lee Clayton's Division Medal from Doctor Who S12, E5 (Fugitive of the Judoon). This model is probably best suited for SLA printing, especially for the crystals, but it should be able to work with FDM printing as well.
Modular compartments for drawer. It comes in three sizes. I recomend to use a brim for the walls I hope you like it
This jig helps you position the tension rods of a div c boomilever at 15cm, use as the photos show. Not built for div c bonus but. Is suitable for div b bonus. (For tension boomilevers)
Labeled for wago 221-2411 storage.
Just a simple multicolor coaster (non multicolor version coming soon)
I used this model to make coasters and the placard for the wall. Scale up to as large as you can possibly print :)
This is a 3D model of the dog tag featured as a Season Pass reward item and a Black Division drop item in Escape from Tarkov. I based the design on the third skin, which I think looks the best, and made it functional so that an actual dog…
Case for Division 6 - Business Card Synthesizer made from two pieces that hold together without screws. Bottom piece functions as a base into which you slide the top part of this case. You don't need any screews but i is possible that…
Science Olympiad 2026-2027 Boomilever Division C Bonus and Non Bonus Jig This is the Division C Boomilever building jig. The backplate includes 2 mounting holes which could be used for both Bonus design and Non Bonus Design with only one…
Science Olympiad 2026-2027 Boomilever Division B Bonus and Non Bonus Jig This is the Division B Boomilever building jig. The backplate includes 2 mounting holes which could be used for both Bonus design and Non Bonus Design with only one…
I printed without top and bottom layers to ensure that there's no internal volumes that can expand when heated. Also, external perimeter extrusion width 0,50mm and otherwise perimeter extrusion width 0,55mm. 0,4mm nozzle. Detect thin…
175th infantry regiment 29th infantry division SVGs included to reproduce for customization, in Tinkercad center the art. 10mm in height would recommend 20% gyroid infill NOTE: Highly recommend slicing and then seeing in your slicer where…
Behold the Commo Panda. 10th Mountain Division G6's logo. Easy print, no special settings, just do a G-code modifier to pause at the layer heights and change colors if you want. There are three (3) different layers. Print Instructions:…
