Hook
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed for style and strength, it's perfect for hanging coats, bags, towels, or keys, helmet etc.
- Rating
- 5 / 5
- Likes
- 1,224
- Downloads
- 2,723
- Makes
- 4
- Views
- 11,340
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🛠 Cura slicer
Settings for Strong PETG Prints
Printer & Material Basics
Nozzle Temp: 240–250 °C (start at 245 °C and adjust if needed)
Bed Temp: 75–85 °C
Cooling Fan: Off or max 20% (layer fan can weaken layer adhesion)
Enclosure: Recommended for consistent temps (not mandatory for PETG, but helps)
Layer & Wall Settings
Layer Height: 0.2 mm (or 0.28 mm for stronger/thicker layers)
Wall Line Count: 3
Wall Thickness: At least 2 – 3 mm
Top/Bottom Layers: 5–6
Top/Bottom Thickness: 1.6–2.5 mm
Infill
Infill Density: 90 - 100%
Print Speed
Print Speed: 30–45 mm/s (slower = stronger)
Wall Speed: 25–30 mm/s
Initial Layer Speed: 15–20 mm/s
Other Key Settings
Initial Layer Height: 0.24 mm (good bed adhesion)
Z Hop When Retracted: On
Retraction Speed: 25–35 mm/s
Generate support : Enable
Support structure : Tree
🔧 Pro Tips:
Dry your filament – PETG absorbs moisture and it greatly reduces strength.
Use a brim or raft if warping is an issue.
For critical strength parts: consider increasing wall count and infill rather than relying on 100% infill alone.
Turn off "Print Cooling" or keep it minimal for layer bonding.