Simple Ninebot G30/G2 Charging Port

This is a simple, fully 3D-printable charging port for the Ninebot G30/G2, designed with flexibility in mind. You can choose between versions that accommodate an XT60 connector with or without a button, depending on the file you select.

The groove around the XT60 opening is designed for a 2mm cord seal, which can be sourced from sites like AliExpress. Additionally, there’s a file for a sealing insert that can be glued into the lid of the charging port-TPU is recommended for printing this part, or you can use a silicone mold for a more advanced solution.

Included are all necessary files and three main versions:

1. compatible with the original charging port seal

     2.  2mm cord seal

     3. No seal

You’ll also find a file for an 8mm spacer, useful if you’re running a 20s6p battery and still want to use the original charging port.

Special thanks to lekrsu for testing and providing photos!

As well as for everyone uploading remixes.

Current available versions (excluding remixes and older versions):

1. Ori-CP_Base-V1_XT60_cordseal
2. Ori-CP_Base-V1_XT60&Button_cordseal
3. Ori-CP_Base-V1_XT60
4. Ori-CP_Base-V1_XT60&Button
5. Ori-CP_Base-V1_XT60_OriSeal
6. Ori-CP_Base-V1_XT60&Button_Oriseal
7. Ori-CP_Base-V1_DualXT60

                                                  Printed scooter Parts Telegrams

      Chat: https://t.me/+A01uN2UHvRc2ZGI0

Channel: https://t.me/+ccS0WQ-qAQFkMTVk

                                                              CEPP Telegram

      Chat: https://t.me/ceppchat

Channel: https://t.me/cepparts

Errors/Reworks ---------->V1 features an offset hole to improve the fit. The plan is to incorporate this offset into the lid as well, which will help reduce the number of files needed.
Status: Updated versions are finished and available.