HVAC Vent Air Deflector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
4"X10" Floor Register deflector
- Rating
- 5 / 5
- Likes
- 64
- Downloads
- 423
- Makes
- 2
- Views
- 4,752
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Hello folks,
This is a floor register air deflector for standard 4"x10" floor registers. This is for use when a floor register/vent gets covered with a piece of furniture such as a couch. This diverter reduces the temperature stratification of air in the room by blowing the air into the open room instead of having it trapped below furniture. If needed there are 6 slots where 1/4" diameter x 1/8" thick neo magnets can be super glued in to help secure to steel registers.
The STL is available to print directly (Note need a print height of at least 250mm) and the Fusion360 file has been included if you want to adapt the design. hope you find this helpful!
If you found this design useful please hit the like button!
-Cheers!