1 / 13
Ducati Hypermotard 1100 Tail Tidy (With no indicators) — image 1
1 / 13

Ducati Hypermotard 1100 Tail Tidy (With no indicators)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tail Tidy for when you install an all in one integrated brake and indicator assembly.

Rating
0 / 5
Likes
11
Downloads
68
Makes
0
Views
1,123
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

Installed an all in one rear brake and indicator LED assembly.

Last part was to clear up the rear tail now the indicators were removed.

This print will allow you to just mount the number plate and light. Utilizing only the rear frame for a nice clean look at next to no money. The tail tidys are insane $$$ for what they are.

For integrated brake and indicator light search - Hypermotard Integrated LED Tail Light. This is the clear version below from - Fender Eliminators (Australia) - There are options also on Amazon.

Print settings,

Recommend PETG at 100% infill. 70% infill should work but 100% is quicker. 

Supports are not needed past the first hole as this is angle is purposely set to 35 deg to help decrease the difficulty to print. Your millage may vary depending on settings. The included G code for the mini prints well on both textured and smooth PEI (with hairspray!).

Tools,

M10 socket, Allen keys, Snips, Star sockets (to remove OEM number pate assembly) and possibly an angle grinder / hack saw and sand paper if you wish to cut down the OEM number plate holder as I have.

An optional 6mm and 5mm drill bit to round out the printed holes if your printers a little rough or you didn't use supports. Makes threading the holes easier. You can of course tap the holes if so inclined but PETG will self tap fine. 

Hardware;

QTY 2 M6x16 (to go though the thick - Rear part of tail tidy)

QTY 5 M6x12 (to go though the thinner area - Forward part of tail tidy and the other 3 are to secure the number plate assembly)

QTY 3 M6 Nuts (Just for the number plate assembly)

Caution the integrated indicator may not be legal in your county. Stay upright and I hope this brings you some joy.

Tags