1 / 13
Ducati Hypermotard 1100 Tail Tidy (With no indicators) — zdjęcie 1
1 / 13

Ducati Hypermotard 1100 Tail Tidy (With no indicators)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tail Tidy for when you install an all in one integrated brake and indicator assembly.

Ocena
0 / 5
Polubienia
11
Pobrania
68
Wydruki
0
Wyświetlenia
1123
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Installed an all in one rear brake and indicator LED assembly.

Last part was to clear up the rear tail now the indicators were removed.

This print will allow you to just mount the number plate and light. Utilizing only the rear frame for a nice clean look at next to no money. The tail tidys are insane $$$ for what they are.

For integrated brake and indicator light search - Hypermotard Integrated LED Tail Light. This is the clear version below from - Fender Eliminators (Australia) - There are options also on Amazon.

Print settings,

Recommend PETG at 100% infill. 70% infill should work but 100% is quicker. 

Supports are not needed past the first hole as this is angle is purposely set to 35 deg to help decrease the difficulty to print. Your millage may vary depending on settings. The included G code for the mini prints well on both textured and smooth PEI (with hairspray!).

Tools,

M10 socket, Allen keys, Snips, Star sockets (to remove OEM number pate assembly) and possibly an angle grinder / hack saw and sand paper if you wish to cut down the OEM number plate holder as I have.

An optional 6mm and 5mm drill bit to round out the printed holes if your printers a little rough or you didn't use supports. Makes threading the holes easier. You can of course tap the holes if so inclined but PETG will self tap fine. 

Hardware;

QTY 2 M6x16 (to go though the thick - Rear part of tail tidy)

QTY 5 M6x12 (to go though the thinner area - Forward part of tail tidy and the other 3 are to secure the number plate assembly)

QTY 3 M6 Nuts (Just for the number plate assembly)

Caution the integrated indicator may not be legal in your county. Stay upright and I hope this brings you some joy.

Tagi