1 / 3
NOKIA Wifi Beacon 2 wall mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple wall mount for your NOKIA router
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 34
- Makes
- 0
- Views
- 201
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Wall mount for your NOKIA Wifi Beacon 2 (router). The mount is designed so you place the router at 90 degrees (see picture) - on the side you want.
Additional materials
2 screws
Special tool
Drill
Level
Installation
Check fit - if needed sand a bit the mount
Screw in one screw
Adjust the level
Screw in the second screw
Place router
Print instructions
Nozzle: 0.4 mm nozzle
Material: PETG highly recommended for heat resistance, or PLA
Wall: minimum 3
Infill: at least 15%
Orientation: print at 45 degrees for maximum strength
Support: enabled, default setting
Ironing: not needed if you print at 45 degrees