P
PrintablesDaniel Krejci
Nokia 3310 trophy
Nokia 3310 trophy
- Downloads
- 322
- Likes
- 40
- Rating
- 0
Search results: nokia
119 models
P
PrintablesRNLDNKP
IKEA Rallen Wireless Charging iPhone Xs Max / Nokia 7 Plus / Samsung Note 9 Stand
I designed this neat stand in which you can mount the IKEA Rallen wireless charger. Standard size: https://www.thingiverse.com/thing:3068268 XL Version: https://www.thingiverse.com/thing:3141797 Flat version:…
- Downloads
- 233
- Likes
- 9
- Rating
- 5
P
PrintablesPlexi
AT&T Nokia BGW320 Modem Wall Mount
This wall mounted bracket is for an AT&T BGW320 Fiber Modem. It allows you to mount your modem on the wall securely. It includes the mount shelf with retaining tabs, a top clip, and an optional power supply mount which clips to the…
- Downloads
- 118
- Likes
- 8
- Rating
- 3
P
PrintablesEvaMika
Nokia Beacon 1 wall bracket
0.2-0.3mm layer height. No supports. Needs couple screws to fix to the wall.
- Downloads
- 118
- Likes
- 3
- Rating
- 0
P
Printableseyebee3D
Phone Stand (Nokia 105)
Stand for non-smartphones - max. 50mm wide / 15mm thick / approx. 115mm high. Suitable for Nokia 105 and phones with similar dimensions. Print instructions Category: Mobile Phone Summary Stand for non-smartphones - max. 50mm wide / 15mm…
- Downloads
- 117
- Likes
- 5
- Rating
- 5
P
Printablessvbnet
MBUS/FBUS programming adapter for Nokia 3310 and related
Intro This adapter allows programming the OG Nokia 3310 or related (Nokia 3315, 3330, 3350, 3390, 3395 and probably others which use the same chassis). It solves two problems: The battery needs to be connected (or power needs to be…
- Downloads
- 112
- Likes
- 10
- Rating
- 0
P
PrintablesMartin Farsø
Nokia Beacon 2 Wallmount
Optimized for 0.4mm Nozel and 0.2mm Layer height, Infill 20% recommended. 2x screw needed for mounting
- Downloads
- 104
- Likes
- 4
- Rating
- 0
P
PrintablesThomas
Nokia ONT G-010G-R 19" Mount
The Nokia ONT G-010G-R supplied with my fibre optic connection should be screwed into the 19’ rack. I designed a corresponding housing for this, which fulfils its purpose.
- Downloads
- 103
- Likes
- 10
- Rating
- 4
P
PrintablesCS Wilson Prints
Nokia Modem Wall Mount (MetroNet)
I needed a wall mount for my MetroNet fiber optic modem (Nokia) and couldn't find one. So I fired up Fusion360 and modeled my own. Hopefully, it'll help you. I couldn't find the model number for the Noika modem, but take a look at the…
- Downloads
- 103
- Likes
- 8
- Rating
- 5
P
PrintablesDampmaskin
Nokia 5110 LCD Module
A semi-accurate model of the Nokia 5110 LCD Module. Useful for creating enclosures. Category: DIY
- Downloads
- 102
- Likes
- 9
- Rating
- 0
P
PrintablesDanie
Nokia WiFi beacon 3 wall mount stand
A wall mount stand for a Nokia Wi-Fi Beacon 3 which can be printed without supports. It has a ledge to exactly fit the bottom of the Nokia Beacon 3 so it stands securely, while it also allows for ample ventilation. At the same time it is…
- Downloads
- 94
- Likes
- 6
- Rating
- 0
P
PrintablesSolveSoul
Nokia Streaming Box 8000 Wall Mount
This model cane be used to wall mount the Nokia Streaming Box 8000. Possibly also works for the 8010, but this is untested. The streaming box fits nicely into the wall mount. The two screws can be used but since the weight of the whole…
- Downloads
- 90
- Likes
- 5
- Rating
- 0
P
PrintablesPyroken
Nokia 3310 dicetower
This dice tower is for people who love the good old Nokia 3310 but also want a dice tower shaped like it. Its easy to hold in hands and can accept dices up to 30mm. Its an easy print in place design so you can print it as it is.
- Downloads
- 82
- Likes
- 11
- Rating
- 0
P
PrintablesSatellietje
Nokia 3310 phone stand
You are doing me a big favor by clicking the Like button :-) Our BHV (Company Assistance) kept losing the Nokia 3310 phone. I made a holder for it. An STL without text is also included.
- Downloads
- 78
- Likes
- 3
- Rating
- 0
P
PrintablesTyler Johnson
Nokia fiber ONT wall mount bracket
A wall mount bracket for a Nokia ONT box. Includes a bracket to hold it against the wall and a little shelf-thing to keep it from slipping down. This allows the ONT to be mounted vertically and still allow the wiring to be facing down.…
- Downloads
- 73
- Likes
- 11
- Rating
- 0
P
PrintablesJG2803
Wall holder for Nokia WiFi Beacon G6
A simple wall holder for the Nokia Beacon G6. I recommend printing with a brim because I had some warping problems.
- Downloads
- 71
- Likes
- 3
- Rating
- 0
P
Printablesmch
Nokia ONT XS-010X-Q 19-inch Modular Rack Mount
I need a Nokia ONT XS-010X-Q in order to connect the UCG-Fiber to my fibre line. As @mauker already has a mount for the UCG-Fiber in his modular rack system, I modified the blank panels to hold my ONT. My print settings (Core One) PETG…
- Downloads
- 71
- Likes
- 11
- Rating
- 5
P
PrintablesDavid Kahler
Ziply Nokia ONT XS-010X-Q Rack Mount
See the remix parent for more info about the esrack system. This is a very tight fit. The rubber feet need to come off and it still takes a bit of shoving. As you can see by the scarring on the bottom of it in the picture.
- Downloads
- 67
- Likes
- 5
- Rating
- 0
P
PrintablesT3TR4
Nokia G42 Smartphone Cover - 2 Variants
Designed a cover for my newly acquired Nokia G42. My first attempt is a bit bulky but I uploaded it nevertheless because maybe someone needs some extra protection for their smartphone. The slim variant has padded corners for extra fall…
- Downloads
- 67
- Likes
- 1
- Rating
- 0
P
PrintablesJake1032
Nokia Beacon mount
Mounting bracket for Nokia Beacon 3.1 router and modem. Print without support. Support pour routeur Nokia Beacon 3.1 S’imprime sans support.
- Downloads
- 65
- Likes
- 2
- Rating
- 0
P
PrintablesMonkey3D
Nokia 105 cover
Nokia 105 cover for TPU printing, it's a bit hard to put on, but it fits nice and snug! TPU normal supports (grid) 0.1-0.2mm layers
- Downloads
- 60
- Likes
- 3
- Rating
- 0
P
PrintablesDan Righter
Nokia ONT XS-010X-R Rack Mount
Revised cutout so that the Nokia ONT XS-010X-R slides in without removing feet. The feet hold the ONT in place.
- Downloads
- 53
- Likes
- 7
- Rating
- 0
P
PrintablesCristian Onescu 🇷🇴
NOKIA THR880 THR-4 – TETRA RADIO Antenna Cover
NOKIA THR880 THR-4 – TETRA RADIO Antenna Cover Supports are needed on the internal ring. It sits very tight. I printed it in PETG.
- Downloads
- 52
- Likes
- 3
- Rating
- 0
P
PrintablesBruce Sutherland
Custom Phone Case for Nokia 6 TA-1033
Description: Introducing a custom-designed phone case tailored specifically for the Nokia 6 TA-1033 model! If you've been searching for the perfect case for your older Nokia device, look no further. This sleek and protective case combines…
- Downloads
- 52
- Likes
- 1
- Rating
- 0
P
Printablesenclaveonmars
Nokia G60 Phone Cover
A phone cover for Nokia G60 smartphones. Its a .step file so you can easily create your own designs. Printed with a 0.4 mm nozzle, 0,1 mm layer heigth on a Prusa MK3S+
- Downloads
- 47
- Likes
- 0
- Rating
- 0
P
PrintablesMTZD
Nokia N-Gage Stand
Display Stand for Nokia N-Gage Sleek, sturdy and fast printing display stand for Nokia N-Gage. This is one of a series of stands for different handheld consoles I created for a friend. All other stands can be found in this collection.…
- Downloads
- 46
- Likes
- 3
- Rating
- 0
P
PrintablesDK1MI
M17 Nokia 3310 USB-C Cover
The missing housing part for a Nokia 3310 modified for M17. It closes the hole around the USB-C port. More info in the modification here: https://rz01.org/m17-3310/
- Downloads
- 44
- Likes
- 8
- Rating
- 0
P
Printablesosi_layer_eight
Nokia 105 Mounting Bracket
I got the best print results unsing Prusament PETG with the model laying on its backside and supports everywhere.
- Downloads
- 43
- Likes
- 3
- Rating
- 0
P
Printablesanjoschu
Nokia 3.1 Case - Nokia TA-1063 3 2018
Made this for my friend's phone as an introduction to 3D printing. We did not find any models for his phone, so I thought let's publish it here. If you found this useful, me know in the comments. :) Prints fine without supports. This…
- Downloads
- 42
- Likes
- 0
- Rating
- 0
P
Printablesemre hocaoğlu
nokia 235 4g (2024) case
This is a custom-designed flexible phone case for the Nokia 235 , optimized for printing with TPU filament . It is designed to protect the device from drops and scratches, while maintaining full access to the keypad, screen, camera,…
- Downloads
- 39
- Likes
- 2
- Rating
- 0
P
PrintablesDocScott
Nokia T-Mobile Gateway Cooling Fan
I recently got a Nokia 5G21 internet gateway from T-Mobile. The device is passively cooled and runs a bit warmer than I'd like although it never had any indications of overheating. I found a silent 120mm fan in my junk box and printed a…
- Downloads
- 37
- Likes
- 3
- Rating
- 0
P
PrintablesiRaiFx
Nokia Modem G-2425G-B Wall mount (Double-sided tape)
Instructions 1- Uses the screws (4mm wood screw might work as well) that came with Modem, tighten the screws to the holes on the model and leave some space to allow installing and removing the modem. 2- then use a QUALITY double-sided…
- Downloads
- 37
- Likes
- 4
- Rating
- 0
P
PrintablesRaveniarty
NOKIA Wifi Beacon 2 wall mount
Wall mount for your NOKIA Wifi Beacon 2 (router). The mount is designed so you place the router at 90 degrees (see picture) - on the side you want. Additional materials 2 screws Special tool Drill Level Installation Check fit - if needed…
- Downloads
- 34
- Likes
- 2
- Rating
- 0
P
Printablesfrostedflakes
Remix: Nokia ONT XS-010X-Q 19-inch Modular Rack Mount - includes mounting option
Modified @memch_2304707 modification of @mauker modular to add: Side mounting so you can attach to other modules Cutout for indication lights on the ONT (optional) Cutout hole for ONT power cord Uses the same backplate from the original…
- Downloads
- 32
- Likes
- 4
- Rating
- 0
P
PrintablesAltair
Nokia 8110 4G wall mount
Nokia 8110 4G is modern reincarnation of a classic cell phone, famously featured in the Matrix movies. The 4G version can't get you out of the Matrix, bud it's still a decent feature phone. I designed wall holder for this phone, which is…
- Downloads
- 31
- Likes
- 1
- Rating
- 0
P
PrintablesCandy Emrys
Case for Nokia C20
This is a case for Nokia C20. I have been looking for a stylish case for my Nokia C20. So I decided to create one.
- Downloads
- 30
- Likes
- 1
- Rating
- 0
P
Printablesvoid
Nokia Cube | Old School Desktop Notification Hub
Nokia Cube Bring a little bit of nostalgia back to your desk with the nokia cube! Fun little project that uses an ESP32S2 Micro-controller and an old nokia 5110 LCD. Use it for whatever you like, display the weather, get crypto prices, or…
- Downloads
- 27
- Likes
- 1
- Rating
- 0
P
Printableszoltanf
Nokia 7.1 Cool Case Remix
Remixed, added fillets on top and bottom edges, also resized to be 73.5 width, as the original 74 is a bit wider than the phone edge. No supports are needed, however the print needs some cleanup afterwards. This is a remix of this…
- Downloads
- 27
- Likes
- 1
- Rating
- 5
P
PrintablesDD3D
Withings / Nokia Home Camera Stand
This is a mount for the Withings / Nokia Home camera because it doesn't really come with one. This has opening for all of the ports at the back of the camera and even openings on either side for the microphones on the camera. I have…
- Downloads
- 26
- Likes
- 5
- Rating
- 0
P
PrintablesCellcon
Rackmount for Nokia ONT G-010G-Q Glasfaser Fiber Modem
Rack mount for Nokia Fiber Modem, which provides easy access to the connectors, while keeping the LEDs visible as well.
- Downloads
- 25
- Likes
- 1
- Rating
- 0
P
PrintablesDiomedesDominguez
Nokia T20 Tabletständer
Tablet-Ständer für Nokia T20 oder ähnliche Tablet's, die nicht dicker als 8,2mm sind. Im Fuss ist eine Freistellung für einen Winkel-USB Stecker. Mit der Stütze kann man die Neigung für die entsprechenden Bedürfnisse anpassen. Source…
- Downloads
- 24
- Likes
- 2
- Rating
- 0
P
PrintablesDocScott
Nokia Gateway Small Cooling Fan
An adapter to allow use of an 80mm cooling fan on a Nokia Gateway (used by T-Mobile). The adapter slips over the top of the gateway and the fan rests inside the adapter. To print the adapter without supports, I used PrusaSlicer and sliced…
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
PrintablesPhilipp Risch
Nokia G50 Phone Mount
This model allows you to mount your Nokia G50 phone (tested and designed for this particular phone case ) on any accessory that features a 3 finger mount, commonly used by Gopro and other mount manufacturers. Suitable for biking and other…
- Downloads
- 23
- Likes
- 0
- Rating
- 0
P
PrintablesJZIoT
Cradle for TMobile_Nokia5G_Gateway Gray Home Internet
Finally got T-Mobile's home internet a few months ago. Made this wall mount (actually fits my ATT Netgear cradle hole mounts) need some washers to mount. Can corner mount either direction and has cable through hole. Came out pretty good.…
- Downloads
- 22
- Likes
- 1
- Rating
- 0
P
Printablesdial
nokia_ont_holder
My first upload. My first upload. I printed mine with supports, but you could try without to see if you can cut down on print time. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: No Supports: Yes Infill: Gyroid…
- Downloads
- 20
- Likes
- 0
- Rating
- 0
P
Printablesakamaka
Phone Charging Dock - Fairphone3+ / Nokia 6.1 / Pixel3a
It all started with the Faiphone3+, then I needed to keep my Nokia6.1 alive 'cause the OLG lottery app wouldn't work on the Fairphone, then my kid wanted one for the Pixel3a. The stands will work with some phone sleeves. Although they are…
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
PrintablesJosef Rambousek
Nokia Phone Stand
Thank you for downloading and commenting.
- Downloads
- 19
- Likes
- 3
- Rating
- 0
P
Printablesjofeinmechaniker
Halter für NOKIA C5 Messmittelaufnahme d8
Halter für NOKIA C5 Messmittelaufnahme d8
- Downloads
- 16
- Likes
- 0
- Rating
- 0
P
Printablescaesar_1111
Nokia 5110 wallmount with charger attachment
This is a wallmount which also allows to lock the standard charger (tested with the EU charger) in place. So if you really want to still use the Nokia 5110 a phone, this should allow you to easily attach the mount to the wall an place the…
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesChasen
Nokia Smart Lighting IP Bridge 19in Rackmount
Nokia Smart Lighting IP Bridge 19in Rackmount
- Downloads
- 14
- Likes
- 2
- Rating
- 0
P
PrintablesАтанас Атанасов
Nokia 7650 Display frame
This is an old nokia 7650 exposure frame. It is made of PLA matt
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
PrintablesChasen
Nokia Smart Lighting IP Bridge Wall Mount
Wall mount for Nokia Smart Lighting IP Bridge
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
PrintablesАтанас Атанасов
Nokia 6230 Display frame
This is an old nokia 6230 exposure frame. It is made of PLA matt
- Downloads
- 12
- Likes
- 4
- Rating
- 0
P
PrintablesYosuof Salem
Nokia beacon 2 holder
A simple holder I modified but couldn't find the original model . Print settings infill 20% (recommended) supports (recommended) but not always needed. I printed it with white PLA With the Kingroon KP3S PRO. Hot end Temp : 225C Bed Temp :…
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
PrintablesАтанас Атанасов
Nokia 6510 Display frame
This is an old nokia 6510 exposure frame. It is made of PLA matt
- Downloads
- 10
- Likes
- 4
- Rating
- 0
P
PrintablesАтанас Атанасов
Nokia 6610 Display frame
This is an old nokia 6610 exposure frame. It is made of PLA matt
- Downloads
- 9
- Likes
- 3
- Rating
- 0
P
PrintablesMarkthe3DDad
Nokia Derby Car
You want something tough for crash derby and what is tougher than a Nokia phone?
- Downloads
- 9
- Likes
- 13
- Rating
- 0
P
PrintablesSJM
Cover Replacement for Nokia USB Charger
Settings Value Infill 25% (adaptive cubic) Perimeters 2 Layer Height 0.15 mm Speed Material PETG / PLA Supporting Material none / only overhangs / organic Comments printed on MK4S with MMU3 FW6.1.4 Ironing no (not needed, but creates a…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
Printablesanother gary
Nokia Lumia 920 Mount
This is a holder I made for use in the car, which will hold a Nokia Lumia 920 and the Nokia wireless charging pad in a slot behind it. The mounting holes are configured for a vehicle-specific mount from proclipusa.com. NOTE: See my…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesM
Nokia 521 Windows Phone Stand with Name-Plate Added
Now, with a little work you can add your name to this sweet Nokia 521 phone stand! Just download the model and import into your favorite 3d modeling program and add some letters. Export, slice, print and enjoy! Category: Mobile Phone
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
Printablesיצחק הראל
Hanokia adapter מתאם לחנוכיה
מתאם לכוסות חנוכיה כאשר הכוס גדול מידי
- Downloads
- 5
- Likes
- 1
- Rating
- 0
P
Printables4us-overdrive
nokia 106 2023 casing inspired by the motorola dynaTAC 8000x
This is the best conversation starter out there! A complete cover for your Nokia 106 2023 black. Instruction: When all parts are printed, you start assembling the phone itself. Then you take the phone holder and secure it in the…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
Printablespjvenda
Nokia G-010G-D ONT single socket box cover support panel PON Fibre modem Openreach
An Openreach FTTP ONT is an optical model that bridges a PON fibre network into ethernet. In the UK Openreach is currently deploying Nokia G-010D-G ONTs although other devices could work too. In my case, I have the fibre wire coming out…
- Downloads
- 0
- Likes
- 1
- Rating
- 0
P
Printables
NOKIA Wifi Beacon 2 wall mount
Wall mount for your NOKIA Wifi Beacon 2 (router). The mount is designed so you place the router at 90 degrees (see picture) - on the side you want. Additional materials 2 screws Special tool Drill Level Installation Check fit - if needed…
P
Printables
nokia 106 2023 casing inspired by the motorola dynaTAC 8000x
This is the best conversation starter out there! A complete cover for your Nokia 106 2023 black. Instruction: When all parts are printed, you start assembling the phone itself. Then you take the phone holder and secure it in the…
P
Printables
Nokia BL-5C BL5C to FS-B800 FS800B B800 Battery adapter
The BL-5C is a 3.7V, 800-1000 mAh battery (about 6mm thick) The FS-B800 or B800 is an 8mm thick battery, slightly longer and wider than the BL-5C. However, it cost almost three times as much. And as you can see in the picture, it's all…
P
Printables
Rackmount for Nokia ONT G-010G-Q Glasfaser Fiber Modem
Rack mount for Nokia Fiber Modem, which provides easy access to the connectors, while keeping the LEDs visible as well.
P
Printables
Dummy Batteries Compatible with Nokia Phones
This dummy battery is made to be compatible with a large series of Nokia phones with a specific battery pinout. There are different spacers included to fit different models, for the ones that I had on hand, but can be easily adapted for…
P
Printables
Remix: Nokia ONT XS-010X-Q 19-inch Modular Rack Mount - includes mounting option
Modified @memch_2304707 modification of @mauker modular to add: Side mounting so you can attach to other modules Cutout for indication lights on the ONT (optional) Cutout hole for ONT power cord Uses the same backplate from the original…
P
Printables
Nokia 7.1 Phone Case
A simple phone case for the Nokia 7.1 phone. The one in the photo used 0 top & bottom layers & a hexagon infill to create the pattern.
P
Printables
Nokia Lumia 520 back
A 3D printed back for the nokia lumia 520, it is more boxy than the original and it is a perfect fit but it does not have the nokia logo on the back.
P
Printables
Nokia 5.1 Plus back cover
A back cover to replace broken one for Nokia 5.1 Plus. Sadly that I lost the original stl and project file after reset my pc. So only gcode available. The filament I used is esun ePLA, and the finally product I can put it on quite fit.…
P
Printables
Nokia Wall Modem / AT&T ONT XS-020X-A
This is a simple scaling up of the original to match the wider mount points of the XS-020X-A ONT device. Be careful when pressing the device to lock in as the studs for the mount are not super strong.
P
Printables
Nokia ONT ( XS-010X-R ) Cover
Used NDG's model to hang my ONT / modem, but wasn't happy with the blinky lights. This cover slides over the wall mounted Nokia ONT, and blocks the blinkies.
P
Printables
Nokia ONT hanging mount
This mount is made to cradle a Nokia XS-010X-Q optical network terminal, part number 3FE49331AAAA. The mount may fit other models. The adhesive that held a square of Velcro on to my ONT failed, and the ONT fell. Rather than re-glue it, I…
P
Printables
NOKIA bl-5c >> DIGMA FIRSTxs3502G adaptor
external perimeters extrusion width = 0.42mm ; perimeters extrusion width = 0.60mm ; infill extrusion width = 0.80mm ; solid infill extrusion width = 0.60mm ; top infill extrusion width = 0.60mm ; support material extrusion width = 0.42mm…
P
Printables
nokia n95-1 battery cover
THIS IS COVER FOR NOKIA N 95-1 ONLY NOT FOR 8GB VERSION print options: PETG Nozzle first layer 240°c other layer 240°c BED first layer 80°C other layer 80°c Max volumetric speed 2-3 mm3/s settings checked on slicer anycubic For any other…
P
Printables
Nokia suction cup adapter - for Remix
Adapter for Nokia CR-115 as shown. See my other model for an Application.
P
Printables
Nokia CR 200 Charger 'Cog'
This is a replacement internal 'cog' for the Nokia CR200 charger. If you have one, and the arms have gone slack then there is a tiny little piece inside that has likely broken or cracked. There's a community discussion where…
P
Printables
Nokia ONT G-010G-R / T Rack Mount
a rack mount for the nokia G-010G-R / G-010G-T ONT -to make the ont so it doesn't slide out, i used some cable ties.
P
Printables
Nokia BL-5C BL5C to FS-B800 FS800B B800 Battery adapter
The BL-5C is a 3.7V, 800-1000 mAh battery (about 6mm thick) The FS-B800 or B800 is an 8mm thick battery, slightly longer and wider than the BL-5C. However, it cost almost three times as much. And as you can see in the picture, it's all…
P
Printables
Nokia N-Gage game cartridge stand
Hello, Sharing my project of simple stand for 15 Nokia N-Gage games. Dimensions: 88 x 45 x 45mm 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs commercially!…
P
Printables
nokia phone
Nokia 3310 is its incredibly long battery life , especially compared to modern smartphones. Back when it was popular, you could charge it once and use it for several days—even up to a week—without needing to plug it in again . This made…
P
Printables
Dummy Batteries Compatible with Nokia Phones
This dummy battery is made to be compatible with a large series of Nokia phones with a specific battery pinout. There are different spacers included to fit different models, for the ones that I had on hand, but can be easily adapted for…
P
Printables
Nokia 6.1 Dock
This is a dock for my Nokia 6.1 cell phone. This is a was a practice of sorts. It works well as a dock, but my eventual plan is to make a cell phone dock specifically for my car. My plan is to use a similar holder to this one, without the…
P
Printables
Nokia phone case for nokia display
Nokia phone case for nokia display For many project using nokia 5110 display Poer USB C
P
Printables
Nokia 5G Gateway - Cooling Fan
The Nokia Gateway is installed in a church tower, it's the only location that gives a good signal. The sun causes the unit to overheat and crash. I designed this 'hat' to sit on top of the unit. The hat has fixings for a 120mm fan that is…
