CMF Phone 1 DACback backJACK
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3,5mm Jack connector backpack plate for Nothing's CMF Phone 1
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 213
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Behold - my first model made for CMF Phone 1, a rear mounted frame for DAC (or USB-C and 3.5mm jack connector). Simple and needed upgrade that can provide an upgrade to have a fully functional 3.5mm jack to connect your wired headphones. Done in FreeCAD, can be printed in any filament, in my case - best results came with PETG with 0.16mm layer.
Fuzzy skin can be used to hide seams, but remember to use it only on main (outer) body.
A longer M2 screws may or may not be needed. In my case - as i'm using printed case with thinner back - original screws fitted, hooked with 3 thread rounds, so longer screws was not used.