Rancilio Silvia Load Cell Mount (beefy)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Load cell mount for Silvia Gaggiuino mod using 1kg 13x13x80mm load cells.
- Rating
- 4.5 / 5
- Likes
- 9
- Downloads
- 94
- Makes
- 1
- Views
- 707
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Heads-up: I kept tolerances quite low, so no guarantees that this will fit your machine.
Pause at the beginning of layer 12 to insert magnets, or use the ‘no_magnets’ version with double sided tape.
I inserted 20 magnets, which is a bit overkill. 2 or 3 on both the left and right side is probably sufficient.
Print without supports, with the magnet side facing down towards the bed.
Note that the ‘magnet lip’ translates the tray forward a bit. If you don't like the look, I recommend trying the 'no_magnets' version.
Also worth mentioning: I used washers between load cells and tray mount, this might be needed clearance wise.