1 / 4
Giant underdesk cabinet with 2 drawers (with optional Gridfinity insert) — image 1
1 / 4

Giant underdesk cabinet with 2 drawers (with optional Gridfinity insert)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a huge underdesk drawer which should be able to hold a lot.

Rating
0 / 5
Likes
15
Downloads
81
Makes
0
Views
571
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

You need drawers under your desk and have a lot of stuff to put in there? Well, then this might be what you were looking for!

This is a big drawer cabinet which can be glued or screwed underneath your desk (if there is enough space underneath).

The cabinet has lots of space (for an underdesk drawer).

Note: Even though the model does use holes to reduce filament, it is still using a lot of filament. The frame alone is close to 1KG spool.

I printed the outer shell and the rails in PETG and the drawers in PLA.

Note:

  • I do have two different upper drawers, one full and one with a separate divider to allow a tabletop rail to have space inside the drawer element.
  • There are two main boxes, one uses a bit less filament, but it is tricky to print and prints much longer.
  • I did print the drawer multiple times. The second incarnation had a stuck filament at the printer towards the end and I created a special front to make use of it anyways (see picture). However - as it is highly unlikely that you would get into the same situation, I did not upload that model.
Extensions

 I created many months later to the underdesk cabinet and / or the lower drawer:

 

Tags