EVA 3 Dragon Ace mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for the Dragon Ace in the EVA 3 toolhead.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 23
- Makes
- 0
- Views
- 308
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a super simple modification of the Rapido mount for the EVA 3, so that it fits the Dragon Ace. The heatsink on the Dragon Ace doesn't taper towards the top like the Rapido, so the original mount wouldn't work correctly. This mount cuts a small bit out to allow for that larger heatsink. It is designed so that the cooling lines up at the exact same nozzle position as the Rapido.
The mount uses the included 3mm spacer that comes with the Dragon Ace to make it the same length as the Rapido. You need to use the longest set of screws that is included in the box with the Dragon Ace. For orientation I had the wires come out each side, then snaked the one cable behind the back so that they both come out the right hand side for easier wiring.
This modification has only been done for the heatset version, if you require the nut version let me know and I can see about making it. F3D file can be sent on request, won't upload due to it containing work that is not my own, and the imported hotend file.