Ablage für Bernardo P600G Spänewand; Shelf for Bernardo P600G chip wall
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ablage für Bernardo P600G Spänewand; Shelf for Bernardo P600G chip wall
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Ablage für die Spänerückwand der Bernardo P600G.
Ca 90 x 90 mm, Tiefe 30 bzw 60 mm
Montage: vorne einhängen und nach hinten kippen.
Material: PETG oder PLA, wobei PETG etwas elastischer ist und sich bei der Montage leichter elastisch verformt und weniger bruchgefährdet ist als PLA.
Druck: aufrecht stehend, mit Supportmaterial für den Haken
……………………………
Shelf for the Bernardo P600G's chipboard.
Approx. 90 x 90 mm, depth 30 or 60 mm
Installation: Hook in at the front and tilt backward.
Material: PETG or PLA, although PETG is slightly more elastic and deforms more easily during installation and is less prone to breakage than PLA.
Print: Upright, with support material for the hook