1 / 2
Ablage für Bernardo P600G Spänewand; Shelf for Bernardo P600G chip wall — zdjęcie 1
1 / 2

Ablage für Bernardo P600G Spänewand; Shelf for Bernardo P600G chip wall

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ablage für Bernardo P600G Spänewand; Shelf for Bernardo P600G chip wall

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
81
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Ablage für die Spänerückwand der Bernardo P600G.
Ca 90 x 90 mm, Tiefe 30 bzw 60 mm
Montage: vorne einhängen und nach hinten kippen.
Material: PETG oder PLA, wobei PETG etwas elastischer ist und sich bei der Montage leichter elastisch verformt und weniger bruchgefährdet ist als PLA.
Druck: aufrecht stehend, mit Supportmaterial für den Haken
……………………………
Shelf for the Bernardo P600G's chipboard.
Approx. 90 x 90 mm, depth 30 or 60 mm
Installation: Hook in at the front and tilt backward.
Material: PETG or PLA, although PETG is slightly more elastic and deforms more easily during installation and is less prone to breakage than PLA.
Print: Upright, with support material for the hook

Tagi