1 / 7
Honda CB500 PC26/32 rubber for the indicator/turn signal
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New rubber for the OEM indicator/turn signal. Slotted bolt and location pin version.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 79
- Makes
- 2
- Views
- 544
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The OEM rubber piece of the indicator/turn signal becomes brittle over time or crack when you hit something. You can fix it with ductape (will hold 200 km/h) but it's not ideal. So I made a replacement piece.
The rubber piece will fit the Honda CB500 PC26/32 (maybe also different Honda's with the same type indicator, see photo's)
V1 = Slotted bolt version (see pictures)
V2 = Locating pin version (see pictures)
Printed on a Prusa MK4S
- Material: Fiberlogy FiberFlex 40D black
- Infill: Cubic 15%
- Print profile: 0.25 mm structural
- Supports: Build plate only
- Print orientation: See picture
- Print time: 1 hour 32 minutes
- Variable layer height: Yes, use adaptive see picture for the settings (this will make the high-lighted piece a lot smoother)
You can play with the infill and wall thickness to get the desired flexibility.
Instructions:
- Disassemble the OEM indicator til you get all the pieces in the picture
- Mount the parts for the indicator itself and put the cable through the hole
- Put the cable through the hollow bolt
- Put with some force and wiggling the bolt in the 3D printed piece (for the slotted version check orientation)
- Assemble the indicator complete
- Test the indicator if it still works
- Mount the indicator on your motorcycle
- Enjoy your new indicator