83 models
Remix of a remix of a remix, I really wanted the replacement to be as similar as possible to the original part, so I added a Beyerdynamic logo and L/R indicators. IMPORTANT: Printed with a 0.25mm nozzle using Prusaslicer 2.5 with Arachne…
Umpire's 4-dial and 3-dial Indicators These are “Count Order” indicators. The order of the dials is balls, strikes, outs, inning -- the same order as you would announce the count. If you prefer a traditional order you can find them here.…
This lens flipper prints in two halves which must be attached together. Alignment holes with pins are included. The handle will also need to be glued in, which can be done after the assembly of the two halves. This is a multi-color print…
This is my take in designing turn lights for a Yamaha TTR250. They need to be printed in two parts (body and cover), and mirrored for L/R indicators. This design has a 12mm hole for bulb fitting. No Support required 0.2mm layer 0.4mm…
Printed on Ender 2 pro. No support, no brim. Swith filament to gain multi colour highlighting the icon. One is left blank to be modified at will.
Tired of having a single cap for each battery state? Here's a 3-in-1 protective cap with indicators for charged, empty and storage. It's a bit of a tight squeeze, but it should fit a normal XT60 connector.
Printed on Ender 2 pro. No support, no brim. Swith filament to gain multi colour highlighting the icon. One is left blank to be modified at will.
This lens flipper prints in two halves which must be attached together. Alignment holes with pins are included. The handle will also need to be glued in, which can be done after the assembly of the two halves. This is a multi-color print…
Remix for standard deck (42mm) and no mercy deck (64mm) Prints without support
LoveCover with LEDS indicators. WARNING: the new Prusa LoveBoards no longer have LEDs, please check your board before printing this mod. You can see a video here:…
This is an absolute perfect fit. See my remix as I've included the pin-1 indicator, and also a 6-pin version. I've printed on my MK4, although the textured plate says MK3. Thanks for saving me a bunch of time, and making a clean, simple…
rmpel's cover was exactly what I was looking for, only the MW logo wasn't quite right for me as my Ender 5 Pro came with a Landy branded unit instead of the MeanWell. So I quickly edited the logo out, opting to leave a blank space instead…
CZ: Repliky ikonických kontrolek používaných ve vozech Škoda 105, 120, 130, Rapid, Garde a nákladních vozech Avia. Model se skládá ze tří částí: vrchní kryt, vložka a plastová matice. Design zahrnuje 2mm prohlubeň, kterou lze vyplnit…
CZ: Tato sada obsahuje repliky kontrolek z nákladních vozů Tatra, traktorů Zetor a autobusů Karosa. Modely jsou primárně navrženy pro použití se SimHub / KOMSI, ale lze je využít i pro jiné projekty. Kontrolky jsou připravené pro tisk…
I have re-remixed my own design to exact dimensions with extras; The previous design fits well, but is 200 mm long. The original lid is 198 mm long. Also, the with is corrected from 110 mm to 111 mm (* for tolerances I made it 110.8) The…
Based on https://www.thingiverse.com/thing:1874648 but fully rebuilt (because of model artifacts I could not get rid of as easily as rebuilding) This 40-pin GPIO cover is based on the dimensions of the source thing. The remix is: 4 pins…
Simplified indicators for the inner part of the bevel protractor. Easier on the eyes to have a single indicator at 0.
thelukec created an extensive collection of condition indicators for many games. However, their collection is still missing indicators for Level Up, A5E and Voidrunner. The rattled condition is also used by some 3rd party O5E publisers,…
Recommended print settings: Material: PLA / PETG Layer Height: 0.15 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional I tried this with a color change, but the first few layers peeled off with the…
Tired of having a single cap for each battery state? Here's a 3-in-1 protective cap with indicators for charged, empty and storage. It's a bit of a tight squeeze, but it should fit a normal XT60 connector.
This is my first attempt at doing any 3D modelling, I used blender and I struggled a lot… I completely started from scratch with the neutral, happy & sad so these are my own attempt. Angry and joyful have been copied and remixed from the…
Installed an all in one rear brake and indicator LED assembly. Last part was to clear up the rear tail now the indicators were removed. This print will allow you to just mount the number plate and light. Utilizing only the rear frame for…
Ducati Hypermotard 1100 Evo indicator adapters for any 8mm indicators. This will allow you to move to cheaper and more extensive range of mirrors for your Ducati. Once you move away from the limited integrated indicator and mirror…
This is a pretty simple adapter to make it more easy to mount universal indicators on Yamaha 125cc motorcycles. I tested it with my Yamaha WR 125 X, and i can confirm it works with Yamaha R 125 and MT 125 models up to at least model year…
After looking for skill markers, skill rings and all sorts of options I've finally decided to model one for myself because I've not found something that completely pleases me. This markers are basically small plastic parts which follow…
Just print it flat on the surface with a black filament. The files were generated from the original STL files, modified and exported as STEP. So a lot of CAD programs should be able to do further modifications and adjustments.
Standard 2x3 gridfinity bin, with cutout to accept a pair of 52mm case/58mm bezel dial indicators with mounting lug casebacks. All the models I found were storing the dial indicator face up. This is wasting an enormous amount of space for…
Inspirado por algunos indicadores de estados publicados que están en ingles, yo he hecho mi propia versión de los estados en idioma español. Se puede imprimir con cambio de color. Adjunto el fichero de fusion360 por si quieres hacer…
these are some indicators with the most common voltages used
Caja para los indicadores de estado publicados en: https://www.prusaprinters.org/prints/146406-indicadores-de-estados-para-dragones-y-mazmorras-t Tienen los separadores por separado para dar flexibilidad a la hora de organizar los tokens.…
My SO's 2015 Toyota Corolla didn't have any indicators for the trunk and gas levers so I created these quick slide on indicators for them. Printed with Hatchbox Green PLA at 0.2mm layer height, probably should have used PETG instead due…
The Original model was for different DC/DC converter module, therefore, model has been modified to fit and larger 7 segment screen in addition to USB output; also, to allow for adjusting both of current and voltage.
Never confuse the tap controlling your reflux condenser with your product condenser again. 2 sizes provided to use on different-sized hoses. Designed to be printed at 0.2mm
I made this quick model to suits aftermarket indicators for the R9 Evotech tail tidy that is made for the stock indicators, its just a simple adapter that suits all 8MM indicators. this might work on other models such as the Yamaha R7 and…
Hardware: 4x M3 self-tapping screws, probably in silver or white if you want to print in white. Hypothetically up to 16mm in length should fit, 8 will be plenty. Printing: Face plate with the screw insets heading up, use supports. Iron…
Don't just guess your nozzle size.. Be sure of it! This frame attachment is for those who have multiple Prusa printers and utilize a variety of nozzle sizes for your prints. These nozzle size indicators offer a simple solution to knowing…
Remix for standard deck (42mm) and no mercy deck (64mm) Prints without support
My earlier nozzle storage system for the E3D box was good, but lacking in a few ways. This resolves those issues. I have added nozzle indicators to identify nozzle types and diameters. The indicators are made of spare filament and provide…
Industrial-grade emergency exit sign model for professional applications requiring authentic commercial aesthetics and production-ready geometry. Key Features: Dimensions: 170 x 100 mm Height: 6 mm Commercial use: Allowed! ✅✅
Print in TPU, The body has room for one or two ¼ watt resistors, and a little silicone grease and it should be atleast as watertight as the OEM plugs.
3-in-1 protective cap with indicators for charged, empty and storage. It's a bit of a tight squeeze, but it fit a normal EC3 connector this is a remix from XT60 battery cap with charge indicators to get an EC3 battery cap Print Settings…
After learning about the rotation indicators for the extruder motor, I loved the idea, but I didn't really like any of the designs I was seeing. I wanted a gear/cog but couldn't find any I liked. So I made my own, I just wanted one but…
This new hex key holder design has numeric indicators on the front to show the size of the hex keys. I've uploaded two versions of this new design: One with only the numeric hex key sizes (hex_key_holder_without_indicators) One with a…
Make your kids a colorful bike, or even yourself, make it more fun. I also uploaded a separate click system so you can adjust it to your bike. Depending on the number and length of the spokes, they then have different angles I recommend…
A few various sizes of basic Empty Chamber Indicators. I printed with and without supports, and the files should be in the orientation I printed them at. I do think you get better bed adhesion on the plugs if you use supports and would…
I made these as a gift more my Mother-In-Law but I thought others would enjoy these. They should be very easy to print. Only a few need supports (mainly the 7 token). A lot of the holes are small enough where supports are not needed. I…
Replacement indicators for knobs for record players from Dual. You can find more information on my blog: https://sicherheitskritisch.de/2021/04/dual-hs-130-1224-record-player-repair-and-detailed-restoration-en/ Print Settings Printer…
This has direction indicators for if the direction changes so you don't forget. The small arrow goes on the side with the lip. Make sure the arrows are facing opposite directions. The reason for the larger arrow is so that gravity keeps…
This has direction indicators for if the direction changes so you don't forget. The small arrow goes on the side with the lip. Make sure the arrows are facing opposite directions. The reason for the larger arrow is so that gravity keeps…
Rotation indicators for Ender 3 Extruder and Z-Axis Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.1 Infill: 80 Filament: 3RDAX PLA Black Category: 3D Printer Accessories
Hello friends Here i designed a indicator using SMD 1206 package LED. Its very small and perfect for RC vehicles. Check out our your tube video the installed this indicator on OPEN RC tractor @ 9:15 Min…
This a flex filament connector for SPC serial ports commonly found on digital calipers and indicators, for those wanting to build a DIY DRO or simply read the data off the calipers over serial. Update : check out #EspDRO which uses an…
Little parts with some effect when you exchange your wheels winter tyres towards summer tyres you can indicate the exchanged wheels for later repeated exchange. So you do not lose overview which wheel was at which place. Print Settings…
I use standee bases with slots for status indicators (e.g, https://www.prusaprinters.org/prints/31390-gloomhaven-standee-base-with-health-counter or https://www.thingiverse.com/thing:3133406 ) and the edges of the cardboard tokens that go…
Ender 3 Sprite Extruder Rotation Indicators Sprocket and Hexagon
This is a mount I designed for the rear of my Mario Retro-Belt Fatbike (may fit other bikes with a similar frame). It enables you to mount the amazing Supernova M99 pro rear light and a left and right indicator (should fit most but I used…
I have recreated this model from scratch to add volume indicators: Laundry detergent scoop by Ben | Download free STL model | Printables.com I have printed it in PLA with adjustable layer height to get the print time under 2h. Also, if…
Adapter required to install an aftermarket indicator to KTM motorbikes. Works with most 690, 790, 890, 950 and 990 models. 4 options - for M8 and M10 threaded indicators - both in low and standard versions.
I drew this adaptor up because I didn't like the design of the commercial ones I have been using for years. It utilizes the four mounting bolts that held the original back on the indicator. Just get yourself some 12x3 magnets and some…
A set of rotation indicators i made for testing NEMA17 motors and control systems in the comfort of my desktop before attaching them to the actual ball shafts. The motors i use have a 5mm shaft. The indicators can be stuck on without any…
When changing from winter tyres to summer tyres or vice versa it needs to identify which wheel was in which place. Therefore, you need something like Vorne Rechts (VR), Vorne Links (VL), Hinten Rechts (HR) or Hinten Links (HL). In English…
I wanted some simple an modern-looking rotation indicators for the stepper motors on my Prusa i3 and MMU that were in keeping with the styling of the printer. There are 2 designs, one with an arrow to indicate a "forward" rotation…
Sometimes you wanna know at a glance whether or not your fans or spinning, and these "spindicators" are perfect for that. Inspired by the designs found on airplane engines, these little swirls are a charming and delightful addition to any…
Level up your endodontic game with this ProTaper file storage solution! This 3D model is a party for your files, complete with numbered compartments from 1 to 10, so you never lose track of wear. It's got a separate holder for clean files…
Morty: Rick, the Vindicators only call when the universe itself is at stake! They're first line of defense against evil! They're the guardians of the unguarded! Rick: They're the writers of their own press releases, Morty! They're a bunch…
Our ceiling fan did not come with indicator on the strings to tell what each is suposse to be doing, it came with stickers on the body witch are hard to see. so i did two model to be able to easily distinguish them.
LoveCover with LEDS indicators. WARNING: the new Prusa LoveBoards no longer have LEDs, please check your board before printing this mod. You can see a video here:…
There are 4 Led Indicators : POWER (Main power supply) The main power LED indicates the presence of the voltage necessary for the operation of the LoveBoard, 3.3 V. H-ACT (Heatsink Fan Act) The heatsink fan cools the hotend components,…
Umpire's 4-dial and 3-dial Indicators These indicators have the dials in the traditional order of strikes, balls, outs, inning. If you prefer a “count order” you can find them here. There are two options of indicator: a four dial…
These are quick connectors that I made for my Sherco enduro bike. The idea is to be able to quickly take them off for track or woods riding but still have a road legal bike in under a minute when you're done. Only the front females need…
gridfinity 2x1 that fits large faced mitu and cheap Chinese DTIs/dial test indicators
Below copied from the Thiniverse details: Available in a (virtual) store near you! I'm extremely happy to announce that, with the help of Mike and the other good folks of Viridian Gaming, licensed versions of these rings are now available…
Simple hang tags to indicate the current Filament Material and Nozzle Size. I have them on a nail inside my enclosure within the camera view. I print in 0.2mm layers, color change after the first and before the last layer. These are…
[CZ] Blinkry na Babettu Nedávno jsem si pořídil kultovní Československý moped, Babettu 210 z roku 1986. Vzhledem k věku není babetta vybavena blinkry (daly se však ve své době dokoupit) a proto jsem se rozhodl je doplnit. Modely dostupné…
I remixed my favorite indicator so that I can use it with Taurus coolers and their analog versions. Version 5.1 is compatible with Tausus V4, TOR and other analogues. This version has a uniform stem thickness. Version 5.2 is compatible…
I finally started getting into swapping nozzles on my MK3S and needed to find a solution for storing my nozzles. I found the excellent Ultimate NozzleBox remix v2 on Thingiverse by ploebb . Unfortunately, my extruder doesn't have a…
21. May 2024 V2.1: Additional x16 version Mount updated 18. May 2024 V2.0: First release V1: https://www.printables.com/de/model/882060 In my opinion, the V1 was still in need of improvement, so I developed a completely new concept from…
There are a lot of miniature base's and health/hit trackers out there but nothing that had everything I was looking for, so I set out to make my own from ground up to check all the boxes that were must haves for me. I made these mainly…
My percussion buddy's timpani tuning gauge was missing some letters. The original replacement parts are expensive (see here: Thomann Adams Strips with Letters ), so I designed this custom piece. This model doesn't include the…
Order the PCB LED_XRP_Robot_Eye Discussion This project requires the construction of a printed circuit board (PCB). The board controls an LED using either of the servo motor connectors or one of the Qwiic expansion connectors. The board…
![[PythonSCAD] Vernier bevel protractor with simplified indicators](https://media.printables.com/media/prints/1164590/images/8773593_7a6f09dc-3a57-439a-b953-9e1c4ab40ac8_2f110c75-6368-4bba-811c-7e080de4c8d9/capture.png)
