1 / 8
Nozzle Size Indicators for Prusa i3 MK3, MK3S, MK3S+, MK4, MK4S Printers — image 1
1 / 8

Nozzle Size Indicators for Prusa i3 MK3, MK3S, MK3S+, MK4, MK4S Printers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A quick & easy way to tell which nozzle size your printers are running.

Rating
0 / 5
Likes
1
Downloads
8
Makes
0
Views
41
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

Don't just guess your nozzle size.. Be sure of it!

This frame attachment is for those who have multiple Prusa printers and utilize a variety of nozzle sizes for your prints. These nozzle size indicators offer a simple solution to knowing which nozzle size is on which printer at a glance. 

Snap-fit Nozzle Size Indicators

These indicators snap directly onto the top of the aluminum frame on any Prusa MK3, MK3S, MK3s+, MK4, or MK4S - just like Prusa's factory spool holders. Once installed, the tolerances are just loose enough for you to slide the indicator back and forth to your liking.

Available Nozzle Size Indicators: 

  • 0.25 mm

  • 0.4 mm

  • 0.6 mm

  • 0.8 mm

Instructions & Suggestions:

  • Slicing the Model

    • Infill - 100% *****

    • Brim - None

    • Print Orientation

      • Rotate 90 degrees so that the model forms a "C" flat on the print bed *****

      • *If you don't orient the model properly & use 100% infill, the print will almost certainly snap during installation

    • Paint-on Fuzzy Skin

      • Once rotated, only select the left, right, and front faces.

        • Be sure to select any of the smaller faces inside the numbers as well

        • Fuzzy skin settings: 0.3mm thickness & 0.8mm point distance

    • Paint-on Supports

      • Enable smart-fill, highlight overhang by > 25, smart-fill angle > 15

      • Enable "support enforcers only" before slicing

  • Installing the Nozzle Size Indicator

    • Place top of the indicator on the aluminum frame first

    • Apply a moderate amount of pressure downwards & into the frame to snap the indicator in place

    • Slide the indicator left/right to your desired position

  • Colored Nozzle Size Numbers for Greater Contrast

    • Easy Way

      • Apply some acrylic paint to the inside face of the numbers

    • Tricky Way

      • When slicing, orient the model so the face with the nozzle size on it is flat on the print bed

      • Use the color change slider to initiate a filament change before the face of the numbers appear (if using 0.3mm layer height, this will be at 1.4 on the color change slider)

      • Initiate another color change at least 3 layers after the first one to return back to the primary filament color (if using 0.3mm layer height, this will be at 2.3 on the color change slider)

Tags