1 / 4
Filament 18mm wall feedthrough with M6 PTFE couplings — image 1
1 / 4

Filament 18mm wall feedthrough with M6 PTFE couplings

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Filament wall feed-through through an enclosure (e.g. IKEA Platsa) with M6 thread on both sides for PTFE coupling

Rating
5 / 5
Likes
11
Downloads
61
Makes
1
Views
815
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

To guide the filament from the dry box into the self-built enclosure (IKEA Platsa) of my Prusa Mini, I developed this wall feed-through. It can be inserted into a drill hole from both sides and screwed together. Two PTFE couplings with an M6 thread can be screwed in afterwards to attach a PFTE tube on both sides and easily guide the filament through the enclosure wall.

  • Wall thickness: 18mm
  • Screw hole diameter: 16mm
  • Filament diameter: 1.75mm

To learn more about the IKEA Platsa enclosure, check out padigree's amazing instructions including all the printable parts.

 

Assembly instruction

  1. Print both parts
  2. Drill a 16mm diameter hole through the housing wall
  3. Insert the bottom part of the printed wall feedthrough into the hole
  4. Screw the top part of the printed wall feedthrough from the other side to the bottom part
  5. Insert a 28mm long PTFE tube into a PTFE coupling with an M6 thread and screw the coupling into the wall feedthrough.
  6. Screw a second PTFE coupling with an M6 thread on the other side of the wall feedthrough
  7. Connect a PTFE tube to both couplings

 

Print instructions

  • No supports needed
  • PETG (it can get warm in the housing, which is why PLA is less useful)
  • Layer height: 0.15mm

 

Accessories

Tags