Lead's Carlon Enclosure Bracket with Velcro Option

This is a simple multi-size bracket that can be printed with the desired hole mounting options edited by the user if needed to fit their solution. The contact surfaces mount poles from 2.5" down to 1 5\8" from what I have on-hand. The bracket attaches the enclosure here- https://www.homedepot.com/p/Carlon-4-in-x-4-in-x-2-in-Gray-PVC-Junction-Box-E989NNJ-5-HD-E989NNJ-5-HD/100404097 to a pole with 2x 60mm wide U-bolts. There are two slots that will tightly fit ¾ Inch double-sided velcro strap. This can be used as a temporary solution, but it is really quite sturdy. It can be found here: https://www.amazon.com/Straps-Double-Self-Gripping-Reusable-Multi-Purpose/dp/B0DFVBZSH7/ref=sr_1_6

U-Bolts of various sizes for your mounting availability can be found here: https://www.amazon.com/dp/B0C6B2FCD5?ref=ppx_yo2ov_dt_b_fed_asin_title

This was created with the very nice RAK19007 setup in mind, created by KBOX Labs, and can be found here. https://www.printables.com/model/804726-carlon-meshtastic-mounting-solution

The bracket for the solar panel companion is here: https://www.printables.com/model/1280880-leads-lora-solar-panel-pole-bracket-velco-and-u-bo

PRINT settings at your own discretion for infil. It's your bracket.

Thank you!