Arduino Nano ESP32-based Nixie Clock with IN-12 tubes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ESP32-based Nixie clock using IN-12 tubes
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 32
- Makes
- 0
- Views
- 636
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v2.0
A ESP32-based IN-12 Nixie clock, based on GreatScott's clock from some time ago.
Both the Arduino sketches (for testing and for normal use) as well as the PCB gerber file are included in this repository.
The basic functioning is unchanged, but the PCB was redesigned from scratch in order to better integrate the Arduino Nano ESP32 board and to adopt IN-12 tubes, which seem to be more robust and are much easier to socket compared to the previously-used IN-14 tubes, which were soldered - the goal was to make it easier to replace in case of fault or damage.
Required materials:
- 4x IN-12 tubes (IN-12A or IN-12B both are ok, since the decimal separator is not used)
- 4x K155ID1 or equivalent (they should be a copy of the Western 74141 IC)
- 4x 16-pin DIP sockets
- 1x 220 pf capacitor
- 1x 100 pf capacitor
- Power supply able to step up from 12 V to 170 V, such as this one, for which the holes on the back are designed
- 1x ~10 mm DC input power jack
- 1x 12 V power supply, compatible with said jack
- 1x LM7805 5V regulator
- 4x M3 threaded inserts