Additional heating of the Prusa Core One chamber
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
additional heating with a dryer for a quick increase in temperature
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 39
- Makes
- 0
- Views
- 3,173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
I noticed that when printing with ASA filament, it takes more than 20 minutes to heat the chamber to 55°C.
That's why I decided to make an adapter mounted in the top vent grille so that you can raise the temperature faster with a hair dryer (NOTE, I think it's best to do this before running the program)
Printing:
after proper positioning, it fits completely on the heating table in Core ONE
print with supports
filling 15%
In the testing phase
using the lowest power of the hair dryer is completely sufficient and will not distort the plexiglass. DO NOT USE A HEAT GUN, IT WILL MELT THE PLEXIGLASS ! ! !