1 / 5
Cable Hook for Flashpoint Junior Wheeled Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cable hook/hanger for Flashpoint Junior Steel Wheeled Light Stand
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 45
- Makes
- 1
- Views
- 183
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Like most photographers, I've always just hung my extension cords for my lights on the light stand knobs or any other horizontal part on a stand/cart. Got tired of having to relocate the extension cables and hanging them elsewhere while I adjusted the riser sections on a stand. I designed this cable hook to hang in the gap behind the bottom riser adjustment knob and the bottom riser base that it threads into. The hook will not affect the ability to tighten/loosen the knob.
Light Stand Details:
- Flashpoint Junior Steel Wheeled Light Stand 12'
- Thread OD: 0.385"/9.779mm
- Thread Length: 0.220"/5.588mm
Print Settings:
- Print part on its side
- Material: I used some PETG. PLA+ would work as well.
- Nozzle: 0.4mm
- Layer Height: 0.20mm-0.25mm Structural
- Infill: 25-35% Gyroid
- Wall Count: 3-4
- Top/Bottom Layers: 4
- Supports: None
Install:
- Unthread bottom knob on stand
- Thread the knob through the hole on the hook
- Thread the knob back on to the stand