Holder for MagWLED case.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This holder was designed to hole the MagWLED case as downloaded from their website.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 71
- Makes
- 0
- Views
- 626
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This holder was designed to hole the MagWLED case as downloaded from their website. It slides in easily with the USB-C port on the bottom and the jst connector out the top. There is a notch cut out near the bottom for the power and USB-C power delivery lights to shine through. The holder has two holes for #8 flat head screws, but double sided tape can easily be used to attach to any surface.
It was designed to print upright and only needs support for the two screw holes (see photos; printed on a Bambu X1C).
Designed to work with the Official MagWLED case found here: https://www.printables.com/model/986752-magwled-1-enclosure-official