Fox DHX2/Float X2 (803-01-545) Vise clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A vise clamp to hold Fox's DHX2s and X2s reservoir
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 54
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This vise clamp is designed with a diameter of 1.315", or just about perfect to hold the rezi for service. If you need this you know what it is, so I wont explain too much. There's a slot for a 12x2mm magnet if you wish to add one.
Print it with the text facing down, no supports needed. 3 walls minimum and the higher the infill, the longer the tool will last and the better it will be (you can clamp harder). I did mine with 100% infill in PLA
The part number from fox would be 803-01-545. Certain models of shocks require different diameter, I can add custom sizes if you leave a comment