Fanatec QR1 to Moza Multi-function Stalks Auto Cancel Trigger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fanatec QR1 to Moza Multi-function Stalks Auto Cancel Trigger This triggers the Auto Cancel feature for the Turn signal
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Public Domain
Fanatec QR1 to Moza Multi-function Stalks Auto Cancel Trigger
This triggers the Auto Cancel feature for the Turn signal stalk, similar to what is shown in this youtube video (https://youtu.be/6kAldZCjieg?si=Vc8oC_EFhBl4sKFx)
The video shows the QR2 which has a much wider diameter than the QR1, so simply attaching the included piece of plastic to hit the auto cancel trigger wont work.
This has a 59mm inner diameter which is the same diameter of the QR1's outer diameter, so a little shaving, sanding, or (what i highly recommend) heating might be needed to get it to fit. I used a heat gun to warm it just enough to slip onto the QR1. If you do the latter, its pretty much friction fit and wont slip, but will be semi-permanent. I made one with a 60mm inner diameter, but that was too loose.
If this gets enough attention and demand, I might just redesign it and really dial in the inner diameter so that it is still a friction fit but also so its easier to remove.
Please feel free to remix