1 / 3
Adjustable motor mount for Wltoys 124008/124010 — image 1
1 / 3

Adjustable motor mount for Wltoys 124008/124010

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Using the original 36XX/5X0 motor mount the gear mesh seemed a little too tight, so I made this adjustable one.

Rating
0 / 5
Likes
5
Downloads
50
Makes
0
Views
240
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Summary:
Using the original 36XX/5X0 motor mount the gear mesh seemed a little to tight, so I made this adjustable one.

It is printed in two halfs to remove the need for supports. The halfs are screwed together with two M2x6mm FHCS. On the bottom the motor is held by a M3x8mm FHCS and the top hole uses a M3x6mm SHCS. Depending on the depth of you motor holes you could use longer screws.

The outer part needs to be 3.1mm tall, so I recommend a layer height of 0.1, two walls and 100% infill. The filament of choice should be able to take the heat of the motor. I used ASA and PA while testing.

Onshape assembly:
https://cad.onshape.com/documents/239226e05dc8c66ff4db2b5d/w/90425c54fc0ff4f5682afbb7/e/36fd346661ba60cfb2bf166e?renderMode=0&uiState=681351e73f0310604434e2a5

Hardware:

PartSizeQty
Flat head cap screwM2x6mm2
 M3x8mm1
Socket head cap screwM3x6mm1

"Happy printing, and God bless, my friend."
— Bob Ross

Tags